1 December 2021 in Physics of Fluids
We develop a deep neural network-based reduced-order model (ROM) for rapid prediction of the steady-state velocity field with arbitrary geometry and various boundary conditions. The input matrix of the network is composed of the nearest wall signed distance function (NWSDF), which contains more physical information than the signed distance function (SDF) and binary map; the boundary conditions are represented by specifically designed values and fused with NWSDF. The network architecture comprises convolutional and transpose-convolutional layers, and convolutional layers are employed to encode and extract the physical information from NWSDF. The highly encoded information is decoded by transpose-convolutional layers to estimate the velocity fields. Furthermore, we introduce a pooling layer to innovatively emphasize/preserve information of boundary conditions, which are gradually flooded by other features during the convolutional operation. The network model is trained using several simple geometries and tested with more complex cases. The proposed network model shows excellent adaptability to arbitrary complex geometry and variable boundary conditions. The average prediction error of the network model on the testing dataset is less than 6%, and the prediction speed is two orders faster than that of the numerical simulation. In contrast to the current model, the average error of the network model with the input matrix of the binary map, traditional SDF, and model without pooling layers is around 12%, 11%, and 11%, respectively. The outstanding performance of the proposed network model indicates the potential of the deep neural network-based ROM for real-time control and rapid optimization, while encouraging further investigation to achieve practical application.
12 March 2024 in Journal of Mechanical Science and Technology
5 October 2023 in Thermal Science and Engineering Progress
1 January 2024 in Thermal Science
To improve the heat exchange tube?s comprehensive performance and achieve enhanced heat transfer with lower flow resistance. The flow and heat transfer characteristics of a newly enhanced tube with triangular ribs were studied by numerical simulation. The results show that the multi-vortex longitudinal swirl developed in the triangular rib enhanced tube can enhance the cold and hot fluid mixing, and make the temperature distribution in the tube more uniform. The field synergy of velocity and temperature gradient was improved and the heat transfer capacity was enhanced. In the triangular rib enhanced tube, reducing the dimensionless pitch ratio of triangular ribs (P* = 0.5, 0.75, 1, and 1.25) and appropriately increasing the area of triangular ribs (A = 8, 12, 16, and 20 mm2) can improve the performance evaluation criteria (PEC). When Re = 8475, P* = 0.5, and A = 20 mm2, the maximum PEC = 1.324 is obtained.
2 September 2021 in Defence Science Journal
To ensure that the missile is safely separated from the internal weapons bay, the jet is used to control the process of missile separation, which is mounted on the front edge of the bay. The length-to-depth ratio of the bay was L/D=8, the diameter of the missile was d1 =0.178 m, the diameter of the jet was d2 =0.05 m . The FLUENT software was combined with our group-developed code under the platform of a user-defined function (UDF) to solve the flow field and the six-degrees-of-freedom (6DOF) of missile. The detached eddy simulation method and dynamic mesh technology were used in the numerical calculations. The boundary condition of missile, bay, and aircraft was no-slip wall condition. The boundary condition of the jet was the pressure-inlet. The pressure far-field boundary was selected as other boundaries. The constraint of the ejection device on the missile was considered. It was found that the jet control device thickens the shear layer, so the shear layer with more gradual velocity gradients, which is beneficial to the separation of missile. The distance between the internal weapons bay and the missile in the positive z-direction with the jet is 1.74 times that without the jet at t=0.5 s. In the case of the jet control device, the pitching angle of the missile ranged from 0.93° to -3.94° , the angular motion range of the missile with the jet is smaller than that without. The jet can make the characteristics of the flow field friendly, and enable the missile to separate from the bay quickly, stably, and safely.