FTIR spectroscopy has been applied to NH4+-exchanged dioctahedral clay minerals to determine the molecular environment of NH4+ and to quantify N concentration. FTIR under vapourpressure control, coupled with heating and freezing treatments has shown that NH4+ ion symmetry varies with the nature of clay minerals. NH4+ has a perfect tetrahedral symmetry in hydrated or dehydrated smectites and belongs to the Td symmetry group. The NH4+-bending vibration is centred at 1450 and 1425 cm–1.The Si4+-Al3+ substitution in dioctahedral clay minerals induces the loss of symmetry elements of the NH4+ tetrahedron which acquires a C2v symmetry. As a consequence, the Td –C2v transition can be used to characterize the smectite–illite transition. Quantification of NH4+ content per half unit cell is provided by nNH4 = k[NH4]/[OH] where [NH4]/[OH] is the band area ratio of the NH4+-bending vibration to the OH-stretching vibration. k = 1.1 for hydrated smectite, 0.9 for dehydrated smectite and 0.8 for illite or tobelite. The bending vibration of NH4+ is chosen for the calculation because it is not affected by superimposed contributions.
In deep geological repositories for high-level nuclear wastes, interactions between steel canisters and clay-rich materials may lead to mineralogical transformations with a loss of the confining properties of the clays. Experiments simulating the conversion of smectite to Fe-rich clay phases in contact with Fe metal have been carried out to evaluate such a possibility by taking into account the effects of a series of critical parameters, including temperature, pH, and Fe/clay (Fe/C) and liquid/clay (L/C) ratios. The mineralogical and chemical transformations observed in these experiments have been compared with data from the literature, and subsequently used to propose a conceptual model for the main mineralogical transformations which can be expected in clay formations surrounding high-level nuclear waste repositories. In the presence of Fe metal and under low oxygen fugacity (<-40) the main mineralogical sequences are as follows: (1)up to 150°C, under neutral pH, and L/C > 5: dioctahedral smectite (di-sm) → 7 Å Fe-rich phase (berthierine, odinite-cronstedtite) for large Fe/C ratios (>0.5), or di-sm → Fe-rich di-sm + Fe-rich trioctahedral smectite (tri-sm) for small Fe/C ratios (0.1) (2)up to 150°C, under alkaline pH (10–12), and L/C > 5: di-sm → Fe di-sm (±palygorskite) for a small Fe/C ratio (0.1) (3)at 300°C, Fe/C = 0.1, and L/C > 5: di-sm → Fe-rich saponite → trioctahedral chlorite + feldspar + zeolite (near-neutral pH); di-sm → Fe-rich vermiculite + mordenite (pH 10–12). Low temperatures (<150°C) and large L/C and Fe/C ratios seem to favor the crystallization of the serpentine group minerals instead of Fe-rich trioctahedral smectites or chlorites, the latter being favored by higher temperatures. The role of L/C and Fe/C ratios and the competition between them at different temperatures is a crucial point in understanding the transformation of smectite in contact with Fe metal.
The alteration and transformation behaviour of montmorillonite (bentonite from Wyoming, MX-80) in low-salinity solutions (NaCl, CaCl2) in the presence of metallic Fe (powder and 86461 mm plate) and magnetite powder was studied in batch experiments at 300ºC to simulate the mineralogical and chemical reactions of clays in contact with steel in a nuclear waste repository. The evolutions of pH and solution concentrations were measured over a period of 9 months. The mineralogical and chemical evolution of the clays was studied by XRD, SEM, Transmission Mössbauer Spectroscopy and TEM (EDS, HR imaging and EELS). Dissolution of the di-octahedral smectite of the starting bentonite was observed, in favour of newly formed clays (chlorite and saponite), quartz, feldspars and zeolite. The formation of Fe-chlorite was triggered by contact with the metallic Fe plate and Fe-Mg-chlorite at distance from the Fe plate (>2 mm).