1 January 2017 in Express Polymer Letters
1 December 2012 in Rubber Chemistry and Technology
One of the important aspects in the development of new tire compounds is the correlation between the dynamic mechanical properties of the rubber, measured on a laboratory scale, and the actual tire performance. The measuring protocol for dynamic mechanical properties with high precision and good correlation with tire properties is therefore of main concern. To predict wet traction, the viscoelastic behavior of the rubber materials at high frequencies (in the MHz range) need to be known. Viscoelastic master curves derived from time-temperature superposition can be used to describe the properties of the materials over a wide frequency range. The construction of master curves for tread compounds filled with different amounts of silica is discussed. From the vertical shifts as a function of temperature, activation energies are derived that apparently are in the linear response region by fulfilling the Kramers-Kronig relations, and their values correspond to physical phenomena as the underlying principle. Strain sweep viscoelastic measurements, per definition outside the linear region, lead to much higher activation energies. Because the deformation strains employed for these strain sweep measurements are more realistic for wet traction or skidding phenomena, it is concluded that the value of the above measurements in the linear region to predict traction is only limited or a first but still important indication.
18 June 2009 in The Journal of Adhesion
The autohesion data are gathered for poly(dimethyl siloxane) (PDMS) with different molecular weights. The influence of molecular weight of the polymer is very pronounced. The data are interpreted on basis of the Wool-deGennes reptation theory; the application of first order kinetics of wetting is also tested. PDMS with a molecular weight only partially permitting the formation of entanglements exhibits a remarkably different and unusual behavior compared with the high molecular weight polymers. The latter develop tack in the form of logarithmic type curves, while the former show the presence of local maxima in the tack-time curves.
18 June 2009 in The Journal of Adhesion
The influence of the network structure on the poly(dimethyl siloxane) (PDMS) rubber is described. The telechelic polymers have crosslinking sites restricted to the ends of polymer chains only, giving well-defined networks. Rubber-rubber tack is related to the network structure, mostly to the amount of loose polymer chains not linked into the network, that can diffuse through the interface. The amount of mobile chains can be adjusted by varying crosslinker amount and functionality. By controlled variation of the degree of crosslinking of the telechelic silicone rubbers, various levels of tack are induced, which may be related to the network topology.