We evaluate and compare the performance and potential of GaAs and of wide and extreme bandgap semiconductors (SiC, GaN, Ga2O3, and diamond), relative to silicon, for power electronics applications. We examine their device structures and associated materials/process technologies and selectively review the recent experimental demonstrations of high voltage power devices and IC structures of these semiconductors. We discuss the technical obstacles that still need to be addressed and overcome before large-scale commercialization commences.
12 November 2018 in IEEE Transactions on Nuclear Science
SiC power devices have been found experimentally to burn out from heavy ion strikes with Linear Energy Transfers (LETs) as low as 2.0 MeV·cm2/mg. In this paper, to better understand the failure mechanisms, we study the single-event burnout (SEB) phenomenon using a unified physics model between heavy ion radiation transport and device response. High-fidelity radiation data, generated from a general purpose Monte Carlo N-Particle transport code (MCNP6.2), was modeled using a double Gaussian function to take into account both the heavy ion and the delta ray contributions. SiC Junction Barrier Schottky (JBS) diodes underwent 3-D TCAD electro-thermal simulations using the double Gaussian model. This model was compared against other heavy ion models to determine the behavior of the thermal response from a heavy ion strike. The results reveal that there is a more rapid thermal response from models using high-fidelity heavy ion radiation data than approximated models provided by TCAD simulators. Peak temperature results from high-voltage SiC JBS diodes agree with experimental observation of SEBs in SiC power devices.
1 February 2007 in APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition
Conventional power delivery methods for microprocessors and high-performance ASICs have fundamental limitations in meeting the power requirements of future IC technologies due to large interconnect parasitics. A new three-dimensional (3D) power delivery approach along with a cellular power supply architecture is proposed as a possible solution to the problems of conventional 2D power delivery. Different 3D integration technologies or possible power-processor integration applications are reviewed, and important 3D design partitioning considerations are discussed. A fully monolithic, two-phase interleaved buck converter design having the potential to be used as a basic building block in a cellular architecture to meet steady-state and dynamic regulation requirements of future processors is presented. Each cell of the converter is designed for 500 mA rated output current, operates at 200 MHz switching frequency, and achieves a control bandwidth of about 10 MHz. Design trade-offs, implementation methods, and prototype results including chip area, loss breakdown, efficiency, as well as dynamic responses to load step changes are presented. Scaling-up of the design through parallel operation of a large number of such standard converter cells is discussed, and the benefits of interleaved operation in drastically reducing the input and output filter size are quantified.
23 March 2021 in IEEE Transactions on Nuclear Science
Both experiments and simulations have shown that single-event burnout (SEB), a catastrophic event, occurs at less than half of the rated blocking voltage in commercial 4H-SiC power devices under a heavy-ion strike. The failure was shown to be due to significant impact ionization near the epi/substrate interface. Adding a buffer layer between the drift epi and substrate layers reduces the impact ionization effect and changes the thermal failure location. In this article, the SEB phenomenon in a 4H-SiC power MOSFET utilizing a buffer layer is investigated. Heavy-ion transport and 3-D electro-thermal transient simulations were performed to study the device response to a heavy-ion strike. In examining the time evolution of electric field profile, charge carrier dynamics, and thermal heat transfer, it is determined that the failure mode for this design is the location shift of the mesoplasma (or hot spot) to within the drift epi region, away from the high field area. A sensitivity analysis was conducted to identify the dominant electrical or thermal factors contributing to device failure due to second breakdown. From these simulations, it is found that the semiconductor thermal conductivity is the primary material parameter that influences the mesoplasma formation.
Bidirectional power transistors are essential components of several power electronics systems, such as matrix converters. In this paper, we present the operating principles, design considerations, and experimental characteristics of a novel planar gate 4H-SiC bidirectional insulated gate bipolar transistors. The impact of various drift layer and unit cell parameters on blocking, on-state, and switching performance has been evaluated by using numerical simulations, and critical performance tradeoffs have been discussed. Based on the optimized design, devices were fabricated on lightly doped free-standing n-type 4H-SiC wafers. Fabricated devices showed good conductivity modulation, with a forward voltage drop of 9.7 V at 50 A/cm 2 at room temperature, which increased to 11.5 V at 150 °C.