Centre for Sustainable Nanomaterials (CSNano) Ibnu Sina Institute for Scientific and Industrial Research (ISI‐ISIR) Universiti Teknologi Malaysia (UTM) Johor Malaysia
Auto-generated profile, based on publicly available information
Nik Ahmad Nizam Nik Malek
Centre for Sustainable Nanomaterials (CSNano) Ibnu Sina Institute for Scientific and Industrial Research (ISI‐ISIR) Universiti Teknologi Malaysia (UTM) Johor Malaysia
Forward osmosis (FO) has been recognized as the preferred alternative membrane-based separation technology for conventional water treatment technologies due to its high energy efficiency and promising separation performances. FO has been widely explored in the fields of wastewater treatment, desalination, food industry and bio-products, and energy generation. The substrate of the typically used FO thin film composite membranes serves as a support for selective layer formation and can significantly affect the structural and physicochemical properties of the resultant selective layer. This signifies the importance of substrate exploration to fine-tune proper fabrication and modification in obtaining optimized substrate structure with regards to thickness, tortuosity, and porosity on the two sides. The ultimate goal of substrate modification is to obtain a thin and highly selective membrane with enhanced hydrophilicity, antifouling propensity, as well as long duration stability. This review focuses on the various strategies used for FO membrane substrate fabrication and modification. An overview of FO membranes is first presented. The extant strategies applied in FO membrane substrate fabrications and modifications in addition to efforts made to mitigate membrane fouling are extensively reviewed. Lastly, the future perspective regarding the strategies on different FO substrate layers in water treatment are highlighted.
Adsorption capacity of pineapple leaf powder (PLP) and surfactant-modified pineapple leaf powder (SMPLP) in removing cationic dye, methylene blue (MB) and anionic dye, methyl orange (MO) from aqueous solution was investigated. SMPLP was prepared by reacting PLP with different concentrations of cationic surfactant, hexadecyltrimethylammonium bromide (HDTMA-Br). Batch mode experiments were conducted at room temperature to study the effects of initial dye and surfactant concentrations on the adsorption capacity of PLP and SMPLP towards cationic (MB) and anionic (MO) dye. The experimental adsorption isotherm data for both MB and MO fitted well with Langmuir in comparison to the Freundlich model. The maximum monolayer adsorption capacity for MB and MO were 52.6 and 47.6 mg/g, respectively. The highest adsorption for MB and MO were achieved by PLP and PLP treated with 4.0 mM HDTMA-Br, respectively. It was found that PLP and SMPLP showed different adsorption behaviour towards cationic and anionic dye. The MO adsorption was dramatically increased with PLP treated with 4.0 mM HDTMA-Br in comparison to PLP treated with 1.0 and 2.5 mM HDTMA-Br. Thus, the concentration of HDTMA-Br affects the adsorption capacity of SMPLP towards MO. The overall result implied that PLP can be applied as an effective adsorbent material to remove different types and classes of dyes from aqueous solution.