1 July 2003 in Computer Methods in Applied Mechanics and Engineering
1 February 2003 in Composite Structures
International audienceThe present work is devoted to the computation of the effective properties of corrugated core sandwich panels. Due to their periodic structure, the homogenization theory is used, based on the asymptotic expansion method. At the leading order, an equivalent Kirchhoff-Love homogeneous plate is derived, with an overall behavior obtained from basic cell problems posed on the three-dimensional period of the panel. The finite element computation of these effective properties is presented in this paper. The accuracy of the homogenization method is proved, since the real panel and equivalent plate responses are very close for membrane and pure bending loadings. However, a discrepancy appears for simple bending loading, underlining that transverse shear effects cannot be neglected. Therefore, a specific study is developed in order to derive the transverse shear stiffness, thus enabling to determine an equivalent Reissner-Mindlin homogeneous plate
1 November 2013 in Mechanical Systems and Signal Processing
1 November 2007 in International Journal of Mechanical Sciences
International audienceIn the field of cable modeling, many models have been proposed to describe the mechanical behavior of simple straight strands under axial loading, and the predictions of these models have been compared to experimental data when available. However, the validity domain of these models has not been evaluated yet because the experimental results reported in the literature are very limited. This problem is addressed here, the results from nine linear elastic models of a 6 + 1 wire single layered strand (simple straight strand) subjected to static axial loads being compared with values from 3D finite element modeling. The analytical models are shown to give satisfactory estimations of the elastic stiffness constants for lay angles below 20 degrees
1 October 2001 in International Journal of Solids and Structures
International audienceThis paper is concerned with the elastostatic behavior of heterogeneous beams with a cross-section and elastic moduli varying periodically along the beam axis. By using the two-scale asymptotic expansion method, the interior solution is formally derived up to an arbitrary desired order. In particular, this method is shown to constitute a Systematic way of improving Bernoulli's theory by including higher-order terms, without any assumption, in contrast to Timoshenko's theory or other refined beam models. Moreover, the incompatibility between the interior asymptotic expansions and the real boundary conditions is emphasized, and the necessity of a specific treatment of edge effects is thus underlined
28 December 2010 in International Journal for Numerical Methods in Engineering