Modern system of time features prognosis reckoning time characteristics of railroad crossing, including such important mactters as the exact time of railroad crossing closure, time sector prior to railroad reopening, actual period of train passage on the spot was developed by authors. Cutting edge system based on logical approach of data analysis received from train management unit is able to fulfill itself essential calculation of time characteristics with results corrections during the system self upgrading on each of existing railroad crossing via negative inverse association. Major subject of our designed kit is the potential link with various mobile navigation systems being helpful for highway transportation optimization service.
Equivalent systems (analogs) are employed in developing a model of the drive mechanism in a sucker-rod borehole pump. Normal and emergency pump operation is simulated on the basis of Matlab-Simulink software. The rod column is regarded as a coupled sequence of active quadrupoles. The results of the simulation are compared with experimental data, and recommendations are made for reducing the energy consumption.
The efficiency of balanced drives, chain drives, and linear rack and pinion drives is compared for sucker rod pumps. An approach to energy-efficient oil extraction using the kinetic energy of the descending drilling stem is developed, and the corresponding mathematical model is derived. The results of numerical modeling are outlined.
The specificities of error detection by polynomial codes in data vectors compared to commonly-used modular codes with summation of unit data bits were analyzed. The authors of the article established the key features of error detection by polynomial codes, the account of which is advisable when building the systems with fault detection. The advantages and disadvantages of using polynomial codes were shown in experiments for technical implementation complexity of concurrent error detection systems and detection ability of the latter.
One of the most common approaches to building concurrent error detection systems of combinational logical circuits is the application of separable block-structured codes. In previous studies of the authors it was established that characteristics of the code directly determine properties of the concurrent error detection system on detecting errors in the unit under test. The choice of a code influences the method of implementation of the concurrent error detection system, including the solution of tasks aimed at control organization of the device which detects all types of errors from the given class, or errors of the given class with the predetermined probability. The authors of the study in question offer the evaluation procedure of error-detection probability in combinational logical circuits under concurrent error detection of the latter on the basis of separable block-structured codes. The authors only consider the model of single stuck-at faults at the outputs of logical elements of the inner structure of a combinational circuit, however the approach itself is universal and after certain improvement may be applied for the evaluation of error-detection probability at the outputs of combinational circuits taking into account other fault models. The example of calculating errordetection probability was given, as well as test results of check combinational circuits from LGSynth'89 set on the evaluation of error-detection probability at the outputs of circuits under concurrent error detection, on the basis of the weight-based code with summation without carries.
To improve the energy efficiency of oil extraction k]the control algorithms for sucker-rod borehole pumps are optimized. Two control algorithms are developed for different operating conditions.