27 November 2017 in Astronomy & Astrophysics
Context. Determining the gas density and temperature structures of protoplanetary disks is a fundamental task in order to constrain planet formation theories. This is a challenging procedure and most determinations are based on model-dependent assumptions. Aims. We attempt a direct determination of the radial and vertical temperature structure of the Flying Saucer disk, thanks to its favorable inclination of 90 degrees. Methods. We present a method based on the tomographic study of an edge-on disk. Using ALMA, we observe at 0.5″ resolution the Flying Saucer in CO J = 2–1 and CS J = 5–4. This edge-on disk appears in silhouette against the CO J = 2–1 emission from background molecular clouds in ρ Oph. The combination of velocity gradients due to the Keplerian rotation of the disk and intensity variations in the CO background as a function of velocity provide a direct measure of the gas temperature as a function of radius and height above the disk mid-plane. Results. The overall thermal structure is consistent with model predictions, with a cold (<12−15 K) CO-depleted mid-plane and a warmer disk atmosphere. However, we find evidence for CO gas along the mid-plane beyond a radius of about 200 au, coincident with a change of grain properties. Such behavior is expected in the case of efficient rise of UV penetration re-heating the disk and thus allowing CO thermal desorption or favoring direct CO photo-desorption. CO is also detected at up to 3–4 scale heights, while CS is confined to around 1 scale height above the mid-plane. The limits of the method due to finite spatial and spectral resolutions are also discussed. Conclusions. This method appears to be a very promising way to determine the gas structure of planet-forming disks, provided that the molecular data have an angular resolution which is high enough, on the order of 0.3−0.1″ at the distance of the nearest star-forming regions.
30 April 2014 in Astronomy & Astrophysics
Astronomy & Astrophysics (A&A) is an international journal which publishes papers on all aspects of astronomy and astrophysics
2 March 2020 in Astronomy & Astrophysics
Context.GG Tauri A is the prototype of a young triple T Tauri star that is surrounded by a massive and extended Keplerian outer disk. The central cavity is not devoid of gas and dust and at least GG Tauri Aa exhibits its own disk of gas and dust emitting at millimeter wavelengths. Its observed properties make this source an ideal laboratory for investigating planet formation in young multiple solar-type stars.Aims.We used new ALMA13CO and C18O(3–2) observations obtained at high angular resolution (~0.2″) together with previous CO(3–2) and (6–5) ALMA data and continuum maps at 1.3 and 0.8 mm in order to determine the gas properties (temperature, density, and kinematics) in the cavity and to a lesser extent in the outer disk.Methods.By deprojecting, we studied the radial and azimuthal gas distribution and its kinematics. We also applied a new method to improve the deconvolution of the CO data and in particular better quantify the emission from gas inside the cavity. We perform local and nonlocal thermodynamic equilibrium studies in order to determine the excitation conditions and relevant physical parameters inside the ring and in the central cavity.Results.Residual emission after removing a smooth-disk model indicates unresolved structures at our angular resolution, probably in the form of irregular rings or spirals. The outer disk is cold, with a temperature <20 K beyond 250 au that drops quickly (∝r−1). The kinematics of the gas inside the cavity reveals infall motions at about 10% of the Keplerian speed. We derive the amount of gas in the cavity, and find that the brightest clumps, which contain about 10% of this mass, have kinetic temperatures 40−80 K, CO column densities of a few 1017cm−2, and H2densities around 107cm−3.Conclusions.Although the gas in the cavity is only a small fraction of the disk mass, the mass accretion rate throughout the cavity is comparable to or higher than the stellar accretion rate. It is accordingly sufficient to sustain the circumstellar disks on a long timescale.
17 October 2023 in Astronomy & Astrophysics
Context. The disk-outflow connection plays a key role in extracting excess angular momentum from a forming protostar. Although indications of jet rotation have been reported for a few objects, observational constraints of outflow rotation are still very scarce. We have previously reported the discovery of a small collimated molecular outflow from the edge-on T Tauri star-disk system in the Bok globule CB 26 that shows a peculiar velocity pattern, reminiscent of an outflow that corotates with the Keplerian disk. However, we could not ultimately exclude possible alternative explanations for the origin of the observed velocity field. Aims. We report new, high angular resolution millimeter-interferometric observations of CB 26 with the aim of revealing the morphology and kinematics of the outflow at the disk-outflow interface to unambiguously discriminate between the possible alternative explanations for the observed peculiar velocity pattern. Methods. The IRAM PdBI array and the 30 m telescope were used to observe HCO+(1–0) and H13CO+(1–0) at 3.3 mm and 12CO(2–1) at 1.3 mm in three configurations plus zerospacing, resulting in spectral line maps with angular resolutions of 3.″5 and 0.″5, respectively. The SMA was used to observe the HCO+(3–2) line at 1.1 mm with an angular resolution of 1.″35. Additional earlier observations of 13CO(1-0) at 2.7mm with an angular resolution of 1.″0, obtained with OVRO, are also used for the analysis. Using a physical model of the disk, which was derived from the dust continuum emission, we employed chemo-dynamical modeling combined with line radiative transfer calculations to constrain kinematic parameters of the system and to construct a model of the CO emission from the disk that allowed us to separate the emission of the disk from that of the outflow. Results. Our observations confirm the disk-wind nature of the rotating molecular outflow from CB 26 - YSO 1. The new high-resolution data reveal an X-shaped morphology of the CO emission close to the disk, and vertical streaks extending from the disk surface with a small half-opening angle of ≈7°, which can be traced out to vertical heights of ≈500 au. We interpret this emission as the combination of the disk atmosphere and a well-collimated disk wind, of which we mainly see the outer walls of the outflow cone. The decomposition of this emission into a contribution from the disk atmosphere and the disk wind allowed us to trace the disk wind down to vertical heights of ≈40 au, where it is launched from the surface of the flared disk at radii of RL ≈ 20–45 au. The disk wind is rotating with the same orientation and speed as the Keplerian disk and the velocity structure of the cone walls along the flow is consistent with angular momentum conservation. The observed CO outflow has a total gas mass of ≈ 10−3 M⊙, a dynamical age of τdyn ≈ 740 yr, and a total momentum flux of ṖCO ≈ 1.0 × 10−5 M⊙ km s−1 yr−1, which is nearly three orders of magnitude larger than the maximum thrust that can be provided by the luminosity of the central star. Conclusions. We conclude that photoevaporation cannot be the main driving mechanism for this outflow, but it must be predominantly a magnetohydrodynamic disk wind. It is thus far the best-resolved rotating disk wind observed to be launched from a circumstellar disk in Keplerian rotation around a low-mass young stellar object (YSO), albeit also the one with the largest launch radius. It confirms the observed trend that disk winds from Class I YSOs with transitional disks have much larger launch radii than jets ejected from Class 0 protostars.
17 September 2024 in Astronomy & Astrophysics
Context. Sulfur monoxide (SO) is known to be a good shock tracer in molecular clouds and protostar environments, but its abundance is difficult to reproduce, even with state-of-the-art astrochemical models. Aims. We investigate the properties of the observed SO emission in the protoplanetary disk of AB Auriga, a Herbig Ae star of 2.4 M⊙ in mass, located at 156 pc. The AB Aur system is unique because it exhibits a dust trap and at least one young putative planet orbiting at about 30 au from the central star. Methods. We reduced ALMA archival data (projects 2019.1.00579.S, 2021.1.00690.S, and 2021.1.01216.S) and analyzed the three detected SO lines (SO 65 − 54, 67 − 56 and 56 − 45). We also used C17O and C18O 2–1 data to complement the interpretation of the SO data. Results. For the three SO lines, the maximum SO emission in the ring is not located in the dust trap. Moreover, the inner radius of the SO ring is significantly larger than the CO emission inner radius, ∼160 au versus ∼90 au. The SO emission traces gas located in part beyond the dust ring. This emission likely originates from shocks at the interface of the outer spirals, observed in CO and scattered light emission, as well as those in the molecular and dust ring. Also, SO is detected within the cavity, at a radius of ∼20 − 30 au and with a rotation velocity compatible with the protoplanet P1. We speculate that this SO emission originates from accretion shocks onto the circumplanetary disk of the putative protoplanet P1. Conclusions. These observations confirm that SO is a good tracer of shocks in protoplanetary disks and could serve as a powerful new tool for detecting embedded (proto)planets.
1 June 2020 in The Astronomical Journal
Analyzing Spitzer and Herschel archival measurements we identified a debris disk around the young K7/M0 star CP−72 2713. The system belongs to the 24 Myr old β Pic moving group. Our new 1.33 mm continuum observation, obtained with the Atacama Large Millimeter/submillimeter Array 7 m array, revealed an extended dust disk with a peak radius of 140 au, probably tracing the location of the planetesimal belt in the system. The disk is outstandingly large compared to known spatially resolved debris disks and protoplanetary disks around stars of comparable masses. The dynamical excitation of the belt at this radius is found to be reconcilable with planetary stirring, while self-stirring by large planetesimals embedded in the belt can work only if these bodies form very rapidly, e.g., via pebble concentration. By analyzing the spectral energy distribution, we derived a characteristic dust temperature of 43 K and a fractional luminosity of 1.1 × 10−3. The latter value is prominently high; we know of only four other similarly dust-rich Kuiper Belt analogs within 40 pc of the Sun.