Residual stresses are present in materials or structural component in the absence of external loads or changes in temperatures. The most common causes of residual stresses being present are the manufacturing or assembling processes. All manufacturing processes, such as casting, welding, machining, moulding, heat treatment, etc, introduces residual stresses into the manufactured object. The residual stresses effects could be beneficial or detrimental, depending on its distribution related to the component or structure, its load service and if they are compressive or tensile. In order to do the studies of residual stresses inside pipes, where the fatigue cracks normally initiate, an equipment that allows applying the Hole-Drilling Method was developed. The equipment efficacy was confirmed in this work by using it to detect residual strains inside a Mock-up that simulates the relief and security nozzle of Angra 1 Nuclear Power Plant (NPP) pressuriser.
A soldagem de metais dissimilares tem diversas aplicações na indústria. Notadamente na indústria alimentícia e na indústria nuclear, este tipo de junta, comum entre aço carbono A36 e aço inoxidável austenístico ou entre aço inoxidável austenístico e cobre e suas ligas, é sempre motivo de análise e cuidados especiais tendo em vista a necessidade de manter a integridade dos equipamentos. Variações térmicas e dimensionais durante o uso de equipamentos que possuem juntas de materiais dissimilares são sempre preocupantes porque nem sempre se conhece o histórico da fabricação ou mesmo da execução de alguma recuperação, dificultando o gerenciamento do envelhecimento. O conhecimento antecipado destas variações por meio do conhecimento da vida a fadiga pode contribuir muito no projeto, na escolha do processo de fabricação, na escolha do consumível de soldagem e obviamente na conservação e integridade do equipamento. Apresentam-se neste trabalho os resultados obtidos para as tensões residuais nas soldas dissimilares e as curvas S-N-P que relacionam tensão com o número de ciclos e a probabilidade de falha, para 4 metais: cobre eletrolítico, aço inoxidável AISI 304, aço inoxidável AISI 316L e aço carbono A36 que foram posteriormente soldados entre si.
This work is related to an experimental thermal stratification study aiming to quantify thermal fatigue damages in the pipe material. Thermal fatigue damages appear as a consequence of non-linear longitudinal and circumferential loads and thermal stripping present in pipes whit thermal stratified flows. In this work an experimental section, simulating the injection nozzle of a NPP steam generator, was subjected to the effects of thermal fatigue due to thermal stratification. The experimental section was made of stainless steel pipe type AISI 304L and its geometric characteristics allowed the same range of Froude numbers of a Pressurized Water Reactor (PWR) NPP. Temperatures were measured externally and internally in three positions and deformations just externally in seven positions. Up-and-down fatigue tests were done to assess the amount of damage induced in the material experimental section. Preliminary numerical simulations were done using a coupled analysis in the ANSYS code with temperatures and pressure inputs taken from thermo hydraulic experimental results. The objectives in this work are quantify the thermal fatigue intensity imposed to the pipe material by thermal stratification experiments, verify the agreement between numerical and experimental thermal stratification results and obtain the material fatigue limit testing specimens made of pipe experimental section and from the virgin pipe. In this work is possible to conclude that stratified flows could be developed in the experimental section, thermal stratification induces considerable thermal stresses and strains in the experimental section pipe material, thermal stratification reduces the material fatigue limit, numerical and experimental results agreed appropriately in some pipe region and disagreed in others.