23 November 2022 in IEEE Open Journal of Circuits and Systems
The voltage source inverters in microgrids often rely on the droop control method integrated with voltage and inner current control loops in order to provide a reliable electric power supply. This research aims to present a Cascade-Forward Neural Network (CFNN) droop control method that manages inverter-based microgrids under grid-connected/islanded operating modes. The proposed method operates the inverter in a bi-directional technique for a wide range of battery energy storage systems or any other distributed generation systems. The proposed strategy uses the CFNN to learn the inverter’s nonlinear model to achieve accurate demand and reference power tracking under different operating conditions for smart grid applications. Additionally, it reformulates the grid control concept to drive the inverter based on the optimal conditions by considering the power demand, reference power, equipment size, and disturbances. Also, it does not require any tuning procedure. The power tracking and operating performance of the proposed CFNN controller are evaluated through several experimental tests using the power hardware-in-the-loop (PHIL) methodology in different scenarios. All results are matched with the proven conventional strategy to confirm its effectiveness.
10 June 2022 in International Transactions on Electrical Energy Systems
The state-estimation and optimal control of multigeneration systems are challenging for wide-area systems having numerous distributed automatic voltage regulators (AVR). This paper proposes a modified Q-learning method and algorithm that aim to improve the convergence of the approach and enhance the dynamic response and stability of the terminal voltage of multiple generators in the experimental Western System Coordinating Council (WSCC) and large-scale IEEE 39-bus test systems. The large-scale experimental testbed consists of a six-area, 39-bus system having ten generators that are connected to ten AVRs. The implementation shows promising results in providing stable terminal voltage profiles and other system parameters across a wide range of AVR systems under different test scenarios including N-1 contingency and fault conditions. The approach could provide significant stability improvement for wide-area systems as compared to the implementation of conventional methods such as using standalone AVR and/or power system stabilizers (PSS) for the wide-area control of power systems.
1 January 2025 in International Transactions on Electrical Energy Systems
The integration of solar power systems into cruising ships is gaining popularity in the marine sector due to the restrictions imposed by the Marine Pollution Protocol and the rapid growth of photovoltaic (PV) technology. However, this integration brings various challenges in the operation of the ship energy system, including resource uncertainty, power imbalance, and reduced service reliability. Therefore, this study proposes a novel three‐stage operation strategy for ship multienergy systems to compensate for the uncertainty of PV generation. In Stage 1, a day‐ahead scheduling process is performed to determine the setpoints of major system components. The goal is to minimize operating costs while meeting electrical, heating, and cooling demands. In Stage 2, a deep neural network‐based PV prediction model is developed. Particle swarm optimization is used to achieve fast convergence and high accuracy. A detailed statistical analysis is then applied for early detection of data drift, which may cause a significant drop in prediction accuracy. The uncertainty of PV output is then estimated based on the new trends observed in the incoming dataset. In Stage 3, a demand response (DR)‐based scheme is introduced to compensate for the uncertainty of PV power, identified in Stage 2. The DR programs allow sharing the load demand among different intervals by adjusting controllable loads. As a result, the amount of power mismatches caused by the uncertainty factor has decreased. Finally, simulation results also demonstrate that the amount of load shedding requirement in the ship energy system is significantly reduced using the proposed method.