13 May 2024 in Journal of Hydrology
Despite decades of research into the interactions between groundwater and seawater, the evolution of permeability produced by iron precipitation has received little attention, resulting in uncertain predictions of permeability in porous media. This study establishes a novel permeability–porosity model for estimating permeability considering the oxidative precipitation of Fe(II) in granular porous media. The accuracy of this model is validated by a series of sand column tests investigating iron precipitation driven by subsurface freshwater–saltwater mixing. The experiments showed a localized pattern of iron precipitation concentrated near the freshwater–saltwater interface in those columns, where a low-permeability zone with intensive precipitation was generated, subsequently leading to a decrease in sand permeability of 45%. Extracted samples analyzed by scanning electron microscopy showed quartz sand particles coated by iron precipitates. With those successful experiments, the newly developed model is validated and fully capable of estimating the sand permeability underlying this geochemical process, providing predictions to within an order of magnitude. The present experimental results and model predictions bring valuable insights into how the pore matrix of a granular porous media evolves during iron precipitation in the subsurface groundwater–seawater mixing zone.
1 March 2025 in Géotechnique Letters
Extensive research has been conducted on tortuosity–porosity relationships for porous media. However, the relationship remains unclear, particularly when the porosity falls within the range 0·2–0·5, which covers most granular geomaterials. This study proposes a novel tortuosity–porosity model for estimating tortuosity in saturated porous media. Syringe tests were conducted by simulating seepage flow through a porous medium under Darcy’s law. The tortuosity was achieved after determining the porosity and permeability using the volumetric saturation method and constant-head method, respectively. Compared with existing models, the proposed model exhibited consistency at porosity values above 0·5 and improved smoothness as the porosity approached 0·2, which outperformed them in accurately predicting the tortuosities in these experiments. In addition, a sensitivity analysis against porosity demonstrated its precision, thereby facilitating its engineering application. These experimental results and model predictions provide valuable insights into the influence of pore geometry on flow paths and corresponding tortuosities.