The work presents a simplified algebraic model for calculating the OH*, CH*, and CO\(_{2}^*\) concentrations within the context of reduced propane flame oxidation treatment. Excited and precursor species are obtained through post-processing of the basic simulation results, employing well-established quasi-steady state expressions produced from the detailed chemiluminescence kinetics. Inaccuracies introduced in these derivations are compensated by applying correction functions fitted by comparing model computations against detailed chemistry results. The formulation is tested in a range of laminar flames to determine its suitability for extension into turbulent flame simulations.
An investigation of the characteristics of turbulent prevaporized n-heptane-air flames, stabilized in the downstream wake region of a stratifier/bluff-body combustor configuration under the effect of inlet fuel-air mixture stratification and preheat, is presented. Experimental and computational results for different fuel-air mixing wake topologies have been obtained by regulating the fuel injection level and the incoming fuel-air ratio gradient. Fourier transform infrared analysis and particle image velocimetry measurements were taken to assess the mixing field characteristics in the near-wake region under nonreacting operation. Chemiluminescence measurements were also obtained to assess the flame topology under reacting conditions. In the computations, an implicit, finite-volume-based large eddy simulation method, coupled with a 25-species reduced kinetic scheme, was utilized for reproducing the mixing and the reacting field characteristics.
27 May 2019 in Theoretical and Computational Fluid Dynamics
This work presents the computational investigation of the nonreacting flow field and of the fuel–air mixing characteristics in a stratified, premixer/bluff-body combustor configuration under the effect of elevated inlet mixture temperatures. Four levels of preheats of the inlet reactants are investigated, ranging from 300 to , for lean to ultralean mixture settings. Different fuel–air mixing wake topologies were captured by regulating the fuel injection level, the incoming fuel–air ratio gradient, and the mixture preheat. An implicit, finite-volume-based large eddy simulation method was employed yielding satisfactory agreement between simulations and counterpart experimental data by successfully reproducing the large-scale features of the interaction of the primary afterbody recirculation with the incoming annular shear layer and the impact of preheat on the developing disk wake topology and fuel–air mixing performance. Thus, the effects of inlet mixture stratification, alone or in combination with inlet preheat, on the performance characteristics of the disk stabilizer were elucidated, while parameters controlling the fuel–air mixing in the recirculation zone and the near wake region were also characterized.