Mechanical properties of hydrate-bearing sediments (HBS) are crucial for evaluating drilling- and production-induced geo-hazards. However, investigations on mechanical behaviors of clayey-silt samples containing hydrate are insufficient due to low efficiency in preparing reconstituted hydrate-bearing samples. Herein, we carried out a series of triaxial shear tests to analyze the deformation behaviors of reconstituted clayey-silt samples containing tetrahydrofuran (THF) hydrate. The sediments were taken from the Shenhu Area, northern South China Sea. The failure mechanisms during shearing are discussed based on micro-to-macro analyses. The results imply that the stress-strain curves show obvious strain-hardening under triaxial shearing, which can be divided into elastic deformation stage, transitional stage, and plastic deformation stage. Besides, the results reveal that cohesion strengthens from 0.09 MPa to 1.28 MPa when hydrate saturation increases from 15% to 60%. Moreover, calculation models are proposed to evaluate failure strengths and Young’s modulus. Establishing empirical formula based on experimental data can quickly determine the strength parameters with knowing the hydrate saturation and stress state of clayey-silt sediments containing hydrate. It is urgent in field operations and numerical simulation to use reliable empirical models.
Commercial exploitation of marine natural gas hydrate (NGH) is crucial for energy decarbonization. However, hydrate production would weaken reservoir mechanical properties and trigger geohazards. Experimental instruments are the basis to obtain the mechanical responses of hydrate-bearing sediments (HBS). Considering the reservoir deformation processes from elastic deformation to residual deformation during hydrate exploitation, this study comprehensively reviewed the feasibility and mechanical research progress of the bender element, resonance column, atomic force microscope, triaxial shear, direct shear, ring shear, and static penetration in mechanical testing. Each test method’s precision and sample size were comprehensively compared and analyzed. Finally, the limitations and challenges of the current mechanical testing methods for HBS were discussed, and their future development directions were proposed. The proposed development direction in mechanical testing methods is expected to provide insightful guidance for the development of instruments and improve the understanding of the mechanical behavior of HBS.
The mechanical properties of hydrate-bearing strata in clayey-silt sediments are significantly different from those of either conventional reservoirs or hydrate-bearing sandy sediments, which poses great challenges for wellbore stability analyses. The stability characteristics of a deviated borehole during drilling in hydrate-bearing clayey-silt sediments (HBS-CS) remain to be studied. In this paper, an analysis of the wellbore stability characteristics of a deviated borehole using the Mohr–Coulomb (M-C) criterion and Drucker–Prager (D-P) criterion was carried out based on the elastic stress distribution model of the surrounding strata of the wellbore and the triaxial shear tests of the HBS-CS. The results imply that the collapse pressure and safety density window are symmetrically distributed with deviation angle and azimuth. Considering the effect of hydrate decomposition, the collapse pressure gradient could become higher and the instability risks would be amplified. Considering the combined effects of collapse, fracture pressure gradient, and the safety density window, it is suggested that the borehole be arranged along an azimuth of 60–120°, which could greatly reduce the risk in a drilling operation.