18 February 2022 in IEEE Transactions on Applied Superconductivity
The Future Circular Collider proton-proton ring would require a high-field septum magnet with a blade as thin as possible for the extraction of the 50 TeV proton beam from the ring. One of the two baseline concepts in the conceptual design report is the “superconducting shield” (nicknamed as SuShi) septum, utilizing a zero field cooled, passive superconducting shield in order to create a zero-field channel for the circulating beam inside the bore of a 3 Tesla canted cosine theta (CCT) type superconducting magnet. Besides the overview of the magnet design, progress in the construction of the prototype is presented.
15 January 2024 in IEEE Transactions on Applied Superconductivity
In the framework of the future circular collider study, a new septum magnet concept (“SuShi”) has been developed, and a prototype was built at Wigner RCP, and tested at the FREIA facility of Uppsala University. The concept uses a canted cosine theta (CCT)-like superconducting magnet and a passive superconducting shield to create a zero-field and high-field region within its aperture. SuShi is the first CCT magnet with both of its winding layers simultaneously impregnated with wax. Details of the construction will be presented, with special emphasis on the wax impregnation procedure which deals with the $\sim$ 15% contraction of wax upon solidification. The empty magnet (no shield in its aperture) was powered without training to 450 A with a peak field of 3.64 T, corresponding to 80% of the short sample limit of the conductor along the load line. No quench or other anomaly was observed during the entire testing period. A clear onset of quench-back was observed above about 200 A.
1 March 2024 in Superconductor Science and Technology
In the framework of the Future Circular Collider Study a new septum magnet concept, nicknamed ‘SuShi’ has been developed, and a prototype was built at Wigner Research Center for Physics, and tested at the FREIA facility of Uppsala University in April 2023. The concept uses a canted cosine theta (CCT)-like superconducting magnet and a passive superconducting shield to create a zero-field and high-field region within its aperture. SuShi is the first CCT magnet with both of its winding layers simultaneously impregnated with wax. This paper describes the first powering test of the empty magnet at 4.2 K, without the shield being inserted in its aperture. The performance of the magnet, including the observation of quench-back, estimation of hot-spot temperatures and the fraction of energy dissipated in the magnet are presented, and most interestingly the absence of any quench during the entire testing period is reported. Sushi reached its nominal +5% peak field of 3.64 T at 450 A, which corresponds to 80% of the calculated short sample limit along the load line, without training.
21 November 2025 in IEEE Transactions on Applied Superconductivity
A new eddy current septum for the fast extraction from CERN's Proton Synchrotron (PS) has been designed and constructed. This development aims to improve the magnet's reliability, extend its service interval, and reduce radiation exposure for maintenance personnel. The new eddy current device is set to replace the existing direct-drive magnet and its ageing power converter. This paper summarizes the electromagnetic design calculations, the mechanical concept and the subsequent detailed design implementation. It also describes the magnet's construction process and the results from the comprehensive validation tests, including magnetic field measurements, to achieve operational readiness ahead of commissioning in the Proton Synchrotron accelerator.