19 July 2022 in Journal of Field Robotics
Within the last couple of decades, there has been increasing research into the use of mobile robots for gas sensing applications. This has led to many different branches of research, most notably on the topics of gas distribution mapping and source localization. This paper aims to provide an up to date and comprehensive overview of the research on these topics for both controlled and uncontrolled environments with ground‐based or aerial robots. To complement other review papers, a greater focus is placed on recent probabilistic algorithms developed for both single robot and multirobot applications.
29 June 2020 in Frontiers in Neurorobotics
With requirements to improve life quality, smart homes, and healthcare have gradually become a future lifestyle. In particular, service robots with human behavioral sensing for private or personal use in the home have attracted a lot of research attention thanks to their advantages in relieving high labor costs and the fatigue of human assistance. In this paper, a novel force-sensing- and robotic learning algorithm-based teaching interface for robot massaging has been proposed. For the teaching purposes, a human operator physically holds the end-effector of the robot to perform the demonstration. At this stage, the end position data are outputted and sent to be segmented via the Finite Difference (FD) method. A Dynamic Movement Primitive (DMP) is utilized to model and generalize the human-like movements. In order to learn from multiple demonstrations, Dynamic Time Warping (DTW) is used for the preprocessing of the data recorded on the robot platform, and a Gaussian Mixture Model (GMM) is employed for the evaluation of DMP to generate multiple patterns after the completion of the teaching process. After that, a Gaussian Mixture Regression (GMR) algorithm is applied to generate a synthesized trajectory to minimize position errors. Then a hybrid position/force controller is integrated to track the desired trajectory in the task space while considering the safety of human-robot interaction. The validation of our proposed method has been performed and proved by conducting massage tasks on a KUKA LBR iiwa robot platform.
5 November 2017 in Virtual and Physical Prototyping
Residual stress is a major problem for most metal-based laser powder bed fusion (L-PBF) components. Residual stress can be reduced by appropriate build planning and post-process heat treatments; however, it is not always avoidable and can lead to build failures due to distortion and cracking. Accurate measurement of residual stress levels can be difficult due to high equipment set-up costs and long processing times. This paper introduces a simple but novel method of measuring residual stresses via a three-pronged cantilever component, the three-prong method (TPM). The method allows for a quick and easy characterisation of residual stress for a wide range of machine parameters, build strategies and materials. Many different cantilever designs have been used to indicate residual stress within additive manufacturing techniques. All of which share the same shortcoming that they indicate stress in one direction. If the principal component of stress is not aligned with the beam geometry, it will underestimate peak stress values. A novel three-prong design is proposed which covers two dimensions by utilising three adjoined cantilever beams, a configuration which echoes that of hole-drilling where three measurements are used to calculate the stress field around a drilled hole. Each arm of the component resembles a curved bridge-like structure; one end of each bridge is cut away from the base plate leaving the centre intact. Deformation of the beams is then measured using a co-ordinate measurement machine. Stress profiles are then estimated using finite element analysis by meshing the deflected structure and forcing it back to its original shape. In this paper, the new TPM is used to compare the residual stress levels of components built in Ti–6Al–4V with different hatch patterns, powers and exposure times.
7 November 2018 in The International Journal of Advanced Manufacturing Technology
Laser powder bed fusion (L-PBF) is a complex process involving a range of multi-scale and multi-physical phenomena. There has been much research involved in creating numerical models of this process using both high and low fidelity modelling approaches where various approximations are made. Generally, to model single lines within the process to predict melt pool geometry and mode, high fidelity computationally intensive models are used which, for industrial purposes, may not be suitable. The model proposed in this work uses a pragmatic continuum level methodology with an ablation limiting approach at the mesoscale coupled with measured thermophysical properties. This model is compared with single line experiments over a range of input parameters using a modulated yttrium fibre laser with varying power and line speeds for a fixed powder layer thickness. A good trend is found between the predicted and measured width and depth of the tracks for 316L stainless steel where the transition into keyhole mode welds was predicted within 13% of experiments. The work presented highlights that pragmatic reduced physics-based modelling can accurately capture weld geometry which could be applied to more practical based uses in the L-PBF process.
1 November 2000 in Computers & Structures