2 May 2019 in Structure and Infrastructure Engineering
A significant vortex-induced vibration (VIV) was observed in a suspension bridge under a wind velocity of approximately 6 and 7 m/s, and with a maximum amplitude that exceeded the serviceability limitations. Since the observation of VIV in an operating bridge was an infrequent event, this study investigated the cause of unexpected VIV. A series of wind tunnel tests revealed the main cause of the VIV was temporary screens applied over the guardrails to shield the curing surface during replacement of epoxy-coated pavement. The characteristics of the measured VIV were consistent with those from experimental results in terms of amplitude and lock-in wind speed range. The effect of Scruton numbers on VIV amplitude was examined for several dominant modes with different modal mass and damping ratios. Since the VIV amplitude is sensitive to the inherent damping ratio, the modal damping ratios of the bridge were identified from output-only modal analysis by using the frequency domain decomposition. This approach was efficient in identifying the damping ratios of high modes that were challenging due to weakly excited signals. The damping ratio of the triggered mode for VIV was the lowest among the investigated modes and estimated to be the level of the design-damping ratio.
1 March 2021 in Journal of Wind Engineering and Industrial Aerodynamics
3 July 2018 in Structural Engineering International
This study proposes an enhanced damping estimation procedure for flexible cable-supported bridges based on operational modal analysis (OMA). The OMA approach combines the natural excitation technique (NExT) with an eigensystem realization algorithm (ERA). An amplitude modulating (AM) function is introduced to stationarize the vehicle-induced responses. This study proposes guidelines for the selection of parameters for the NExT–ERA algorithm and AM-based stationarization. The proposed damping estimation procedure and parameter selection guidelines were applied to the data gathered from measuring an in-service cable-stayed bridge over a three-day period. The correlations between the identified damping ratios and environmental factors such as vibration level, temperature and wind velocity were investigated. The effect of aerodynamic damping during OMA is also discussed. The examined data identifies the amplitude-dependency of the damping ratios.
29 April 2025 in Journal of Civil Structural Health Monitoring
Long-span bridges, due to their high flexibility and low damping capacity, are particularly vulnerable to hazardous vibrations, such as vortex-induced vibrations (VIVs). Effective monitoring and early warning systems require advanced predictive models capable of accurately forecasting dynamic responses and detecting anomalies. This study proposes a Bayesian-optimized bidirectional long short-term memory sequence-to-sequence regression model for predicting vibrational responses and detecting abnormal structural behavior in long-span bridges. The proposed framework is designed with two configurations: one optimized for accurate prediction under normal conditions and another tailored to capture abrupt changes for anomaly detection. The model is trained and validated using structural health monitoring and weigh-in-motion data from an operational bridge, incorporating key environmental and operational conditions. By leveraging Bayesian optimization for hyperparameter tuning, the framework improves predictive accuracy and generalization. The model’s performance is evaluated based on the prediction accuracy, the impact of time lag selection, and sensitivity of key input variables. Additionally, anomaly detection is achieved by analyzing residuals between predicted and measured responses, enabling early identification of hazardous events such as VIVs. The validation results demonstrate high predictive accuracy, with RMSE values below 0.05 m/s2 and R2 exceeding 95%, alongside robust anomaly detection capabilities. These findings highlight the effectiveness of the proposed framework in enhancing the safety, reliability, and early warning capabilities of long-span bridges.
1 May 2023 in Journal of Structural Engineering
1 October 2024 in Journal of Structural Engineering