28 July 2022 in KSCE Journal of Civil Engineering
The deformation pattern of the stratum caused by constructing a new metro tunnel crossing an existing tunnel is different from the deformation pattern caused by general tunnel construction. However, the prediction results by the ordinary surface settlement prediction model often bring significant errors because the complex influence of existing tunnels on the surface settlement caused by the excavation of new tunnels is always neglected. Based on the equivalent layered method and stochastic medium theory, a prediction model for the surface settlement due to excavating a new tunnel under an existing tunnel in the heterogeneous stratum was established. By equating the bending stiffness of an existing tunnel before and after applying the equivalent layered method, the layer index was determined. The critical parameters of the stochastic medium theory were derived based on the relationship between the critical parameters of both the Peck empirical formula and the stochastic medium theory. The surface settlement of some typical projects was predicted and compared by the prediction model in this paper and the ordinary prediction model. The comparison shows that the proposed prediction model and parameter determination method in this paper had high accuracy and applicability. The results of the prediction model in this paper fit the results of numerical calculation. The research of this paper can provide a new method for the theoretical prediction of surface settlement caused by the excavation of a new tunnel under an existing tunnel in the heterogeneous stratum and the determination of critical parameters of the stochastic medium theory.problem in the construction industry, and helps reducing the material waste and budget cost.
25 August 2023 in PLOS ONE
Cracks in concrete tunnel linings are inevitable during service life. It is necessary to keep abreast of the cracking condition of the lining and formulate reasonable inspection and maintenance measures to ensure operational safety. Considering the influence of train loads on the safety and service performance of cracked linings, the expansion process of lining cracks and the maintenance strategy of tunnels during the service period was investigated. The impact of detection probability and maintenance measures on the service life of tunnel lining and the cost of detection and maintenance of cracked lining in the whole life cycle was analyzed; the optimization calculation model of tunnel lining crack detection and maintenance strategy based on genetic algorithm was established with the multi-objective optimization function of maximizing the service life of detection and maintenance and minimizing the total cost of detection and maintenance of fatigue cracks. The optimization analysis of lining crack expansion, detection, and maintenance was carried out for an operational railroad tunnel. Finally, an optimization analysis of lining crack expansion and maintenance was carried out in a railway tunnel. The results show that the stress intensity factor at the tip of the lining cracks is the same as the train load waveform; the magnitude of the stress intensity factor approximately satisfies the exponential function relationship with the depth of cracks; the fatigue service life of cracked lining is positively correlated with the cost of inspection and maintenance; the adoption of the necessary maintenance and the increase in the number of inspections and maintenance have a better economy while meeting the expectation of the service life. According to the Pareto solution set, the management can formulate the inspection and maintenance strategy based on the tunnel’s expected life and maintenance budget.
6 August 2024 in KSCE Journal of Civil Engineering
To address the issue of stress concentrations afflicting non-circular tunnels caused by void defects, a method of analytical solution is introduced, which is grounded in the theory of complex variables. Firstly, the mapping function of the non-circular tunnel containing a void was obtained; then the power series method was implemented to determine the coefficients of the stress function and formulate the solution equations. Finally, the analytical solution was verified by simulation through Flac3D software. The effects of pore depth, width, stress inclination and stress ratio on the stress and deformation of the tunnel are considered analytically using the method of this paper. The findings indicate a strong agreement between the analytical solution and the numerical solution, and there is an obvious stress concentration at the defect location. The void depth, width, main stress field inclination and stress ratio contribute remarkably to the stress concentration at the location of tunnel void defects, thus affecting the mechanical behavior and safety condition after tunnel excavation. The results of the study propose a fast and accurate elasticity calculation method for non-circular tunnel excavation problems, offering a valuable reference to similar tunnel projects in design, construction and stability analysis.