13 December 2016 in IEEE Transactions on Automatic Control
This technical note studies the finite-time consensus problem of leader-follower higher-order multi-agent systems with mismatched disturbances. To solve such a problem, by combining the non-singular terminal sliding-mode control (NTSMC) and disturbance observer based control (DOBC) methods together, a distributed active anti-disturbance cooperative control scheme is proposed. Firstly, to estimate the matched/mismatched disturbances of each follower, a finite-time disturbance observer is constructed. Secondly, by distributedly employing the mismatched disturbances estimates, integral-type non-singular terminal sliding-mode surfaces are designed for followers. Thirdly, distributed protocols are proposed based on the surfaces. In the presence of mismatched disturbances, these protocols achieve finite-time output consensus for the agents. Simulations validate the correctness and effectiveness of the proposed control scheme.
9 March 2020 in IEEE Transactions on Automatic Control
In this paper, the distributed finite-time optimization problem is studied for integrator chain multi-agent systems with mismatched/matched disturbances and quadratic-like local cost functions. The agents' models are permitted to be heterogeneous with different orders ranging from first-order to higher-order forms. To solve the problem, a nonsmooth embedded control framework is established, which consists of two parts. In the first part, by using nonsmooth control theory and designing some distributed finite-time estimators to estimate the gradients on the agents' local cost functions, a distributed finite-time optimal signal generator with fractional powers is constructed, of which the output signals globally converge to the minimizer of the global function in finite time. In the second part, by embedding the generator into the feedback loop and taking its output signals as the local optimal reference outputs for the agents, and combining nonsmooth control and finite-time disturbance observer techniques together, some feedforward-feedback composite tracking controllers are designed for the agents to track their local optimal reference outputs in finite time.
31 July 2018 in IEEE Transactions on Industrial Informatics
Under the noncascade structure, a permanent-magnet synchronous motor (PMSM) regulates the speed and current in one loop. On the one hand, fast dynamic performance requires large transient current to provide a high torque. On the other hand, unlike a cascade control, the q -axis current is no longer governed by a reference current signal. In such a system, the nominal controllers cannot guarantee that the q -axis current is within the required range. But an excessively large transient current may threaten the circuit safety. To solve the overcurrent protection problem, the ordinary solution is to choose conservative control parameters, but the dynamic performance inevitably suffers a certain degree of loss. In order to improve this drawback, a simple and effective control scheme is introduced with a current-constrained technique. By constructing a special nonlinear gain, the punishment mechanism for the q -axis current is established in the control action directly. The proposed control approach does not impose limitations on the initial state. Moreover, it has good robustness to load torque uncertainty and undergoes rigorous theoretical analysis. Besides, the proposed current-constrained controller has a very concise structure. It yields a higher reliability of the PMSM control system. Comparative simulation and experimental results between the classic PID and the current-constrained controller on the PMSM servo system verify the feasibility of the presented control scheme.
6 April 2018 in IEEE Sensors Journal
In this paper, the high-dimensional distributed state estimation problem is investigated for a class of sensor networks within the cubature Kalman filtering (CKF) framework. The network consists of two types of nodes, i.e., communication ones and sensor ones. First, a hybrid consensus-based cubature Kalman filtering (HCCKF) is developed by blending the two existing approaches, namely, consensus on measurements (CM) and consensus on information (CI). As a result, the proposed filtering algorithm has complementary features of CM and CI, which turns out to be a better solution to the distributed state estimation problem. Secondly, estimation errors in HCCKF are proved to be exponentially bounded in mean square. Finally, a target tracking case-study in an example sensor network is given to demonstrate the effectiveness of the proposed HCCKF.
29 September 2021 in IEEE Transactions on Industrial Electronics
In this article, we studied an optimal formation control problem of general integrator chain multiagent systems with strongly convex local cost functions. The control goal is to design appropriate controllers for the agents such that they reach a desired formation shape and the global cost function is minimized. To achieve the goal, a modular control scheme with two modules is proposed. First, in Module I, an optimal formation signal generator is designed, whose outputs asymptotically converge to the minimizer of the global cost function. Second, in Module II, by employing the outputs into the feedback loop as the agents’ reference trajectories, some linear-tracking controllers are designed for the agents to track the references asymptotically. With both modules, the proposed control scheme realizes the optimal formation control goal asymptotically. Moreover, the proposed control scheme is also applied to solving an optimal formation control problem of multiple mobile robots, where the robots’ total “relative” weighted squared moving distance requires minimization. The simulations and experiments validate the effectiveness and practicality of the proposed control scheme.
13 May 2022 in IEEE Transactions on Control Systems Technology
The formation control problem for leader–follower wheeled mobile robots (WMRs) is investigated in this article. A formation control strategy is proposed based on the embedded control technique. Different from the conventional design philosophy of designing the formation controller based on the formation tracking errors directly, the proposed strategy decomposes the formation control task into two subtasks. One is the virtual signal generator (i.e., virtual follower) design, and the other is the trajectory tracking controller design. The virtual signal generator is devised to act as a virtual follower such that it “achieves” the desired formation control goal, whose output is taken as the reference trajectory for the follower. To solve the subtask of trajectory tracking controller design, an unconstrained controller and a constrained controller with saturated velocities are designed, respectively. A rigorous stability analysis of the closed-loop system is given under these two kinds of controllers. Comparative simulations and experiments among the unconstrained controller with higher gains/lower gains and the constrained controller are given to illustrate the feasibility and effectiveness of the proposed formation control strategy.