1 January 2010 in Journal of Materials in Civil Engineering
This paper presents the results of a study on the effect of high temperatures on the mechanical properties of high-strength concretes. Mixtures were prepared with water to cementitious material ratios of 0.40, 0.35, and 0.30 containing silica fume at 0, 6, and 10% cement replacement. After heating to 100, 200, 300, and 600°C , the compressive strength, the splitting tensile strength, and the corresponding ultrasonic pulse velocity were measured. A substantial loss of strength was observed for all compositions at 600°C , particularly the silica fume concretes in spite of the superior mechanical properties provided by silica fume at room temperature. The average residual compressive and splitting tensile strengths of the concretes at 600°C were 30 and 25% of the room-temperature strengths, respectively. It was found that the rate of the splitting tensile strength loss is higher than the rate of the compressive strength loss at elevated temperatures and that the ultrasonic pulse velocity measurements slightl...
1 February 2009 in Journal of Materials in Civil Engineering
Optical spectroscopy is a viable approach for subsurface monitoring of pH levels in civil engineering materials. In this work, we describe a method by which optical fibers may be implemented as probes for the in situ measurement of pH levels. This paper describes the development of a nanoporous polymeric matrix, which hosts pH-sensitive chromoionophores. Details of how this pH indicator is strongly attached to the polymer chains through hydrogen bonds are described. Experiments are conducted in the laboratory in aqueous media for monitoring pH levels in highly alkaline and moderately acidic regions. Some detail on indicator immobilization, and signal reversibility are also reported.
1 April 2008 in Journal of Geotechnical and Geoenvironmental Engineering
This paper demonstrates the usefulness of near-infrared optical fiber analysis for sensing moisture and liquid hydrocarbons in soil. Through experiments we have carried out sensing probes which have been developed, comprising optical fibers that use the evanescent field of the guided energy. The movement of water through dry sand was simulated in the laboratory and the sensors were used in situ to measure the variation of soil moisture in real time. A similar experiment simulated the movement of an organic liquid (mineral oil) through water-saturated sand, and the sensors were used in situ to monitor the hydrocarbon movement. We found that a hydrophobic polymer-coated waveguide can amplify the hydrocarbon signal while minimizing that of water, making it possible to detect a dissolved hydrocarbon. Tests show that the second derivative transform of the absorption spectra could be used to distinguish classes of hydrocarbons.
1 July 2005 in Research in Nondestructive Evaluation
A gas-leak-detection system was designed based on the concept of oxygen-level measurement. Optical fibers were produced with gas-permeable polymeric cladding material doped with oxygen-responsive porphyrin sensor molecules and subsequently interrogated via the evanescent field along the fiber length. Tests were performed with simulated methane-gas leaks in air and under dry and saturated sand. Results of sensor sensitivity, response time, and reversibility are presented.
1 May 2004 in NDT & E International