The rapidly growing world of FPGA devices offers important as well as interesting platforms for analyses of process scaling. It creates also new study opportunities in case of new process variations and degradation effects. Changes in parameters of FPGAs in time or under either power supply voltage or temperature variations result in timing variations or delays and may affect the final design quality and dependability. Such timing variations may result in delay faults, up to the final device or equipment malfunction or failure. FPGA designs must be carefully tested and simulated during the design phase. This area is well-covered by many papers and publications and being investigated again with the new processes coming every approximately 2 years. This paper investigates the area of effects caused by the FPGA chip design and metallization or design trade-offs. The paper presents interesting results obtained during various tests including the important values of the total delays caused by neighboring loaded SLICEs or locations in the FPGA. These results were obtained by a method of frequency and delay measurement, capable of delivering stable results in the range of 0.1ps (100fs), using only inexpensive tools and methods.
This paper presents a method and results from measurement of internal parameters of Xilinx XC7Z020 Zynq device - the programmable microelectronic nanostructures designed on 28 nm TSMC's technology. The presented method utilizes undersampling approach and a very easy way of processing of BRAM data streams. The presented flexible circuits have been used in various measurements of timing parameters delays in FPGAs, up to measurements or detection of the aging issues. The paper presents surprising overview of such measurements with the key result, that the usability of the latest 28 nm devices under accelerated conditions is strictly limited to lower frequencies or significantly lower temperatures. It also significantly limits the possibility of study of aging effects under accelerated conditions and might affect security applications. The paper extends the measurements and results available from previous technology nodes and tries to uncover new information and areas of the latest high-end technologies.
The reliability issue, including aging processes in modern devices with very fine structures and utilizing programmable technologies, being applied in high-performance or dependable systems in various safety, automotive or space applications, is sometimes very difficult to predict, measure or watch. The task is well-mastered in the world of ASIC, the situation is slightly different for FPGA devices. Modern FPGA devices incorporate number of true dual-port memory blocks with 8-T cells, hence offering new options. However, such blocks are typically used for data storage and processing purposes. This paper presents a new way of utilization of the RAM block (BRAM) for the delay fault detection purposes. The BRAM and a simple controller log risky transitions or delay fault events and may positively affect the overall reliability of the device as well as all the system.
Amazingly growing portfolio of new technologies gains from design and manufacturing of advanced integrated circuits. FPGAs (Field Programmable Gate Arrays) are regular parts of modern complex mechatronics systems, as a modern multidisciplinary field of engineering. They are also used in various advanced control systems, typically designed as dependable systems in order to ensure high level of reliability requirements put in many related areas. This paper presents a new previously unpublished overview and set of methods. It deals with new and unusual ways of utilization of BRAM blocks in FPGAs. They can be utilized in selected modern systems very effectively. The proposed methods and approach is demonstrated on Xilinx FPGAs. Results from experiments are included as well.
Communication technologies are key and standard parts of most of today's integrated as well as field systems. Such technologies have experienced an explosive development during the last decades. More recently, short-distance communication systems have also been discussed as a way to connect embedded electronic systems in industrial applications. As industrial robots are assumed to be real-time and safety-critical in combination, test- and error correction technologies have to meet new challenges. However, many existing technologies for error correction are not able to manage multiple faults, are too slow in terms of encoding and decoding to satisfy industrial timing constraints. This paper introduces our PENCA architecture as a new concept of dependable fully configurable system, which promises a combination of reasonable overhead and relatively fast encoding, and ensuring high level of dependability, while keeping important flexibility, programmability and testability. Implementation results on Xilinx and Altera FPGA technologies are presented as well.