11 November 2018 in IEEE Transactions on Intelligent Transportation Systems
In this paper, an ecological adaptive cruise controller (ECO-ACC) for parallel hybrid electric vehicles (HEVs) in a car-following scenario is presented to improve the fuel economy and to maintain a desired inter-vehicle distance from the preceding vehicle. An ACC based on action dependent heuristic dynamic programming (ADHDP) is proposed to obtain an ecological velocity profile and realize an active distance control in normal driving situations. ADHDP is able to adapt internal parameters online and can thus deal with systems with disturbances. Furthermore, an adaptive energy management strategy for HEVs is introduced to control the gear shift and power split for fuel consumption optimization. The gear shift command is designed by enumeration, and the power distribution between the engine and the electric motor is performed by ADHDP. The developed ACC and energy management strategy are finally combined to an ECO-ACC to achieve a multi-objective optimization. Only the current velocity and acceleration of the preceding vehicle are used while knowledge about the future velocity is not needed. The simulations of different driving cycles indicate that the ECO-ACC can lead to near-optimal fuel economy and comfortable driving.
11 December 2020 in IEEE Transactions on Vehicular Technology
In recent years, the electric vehicle is attracting interest from the academic and industrial automotive sector due to its potential towards decarbonizing the mobility sector. In order to increase the operational energy efficiency of electric cars in real driving conditions, various advanced driving assistance systems (ADAS) are developed to encourage eco-driving. One potential ADAS system is energy-optimal adaptive cruise control (EACC), an adaptive cruise control system that utilizes environmental information such as road topography, speed limits and traffic information, to plan in real time the speed trajectory that minimizes a host car's energy consumption. The optimally controlled host car is expected to consume less energy in a trip, compared to its preceding car. In addition to the main target of saving energy, EACC has two other control objectives for the host car: (i) keep a minimum safety distance to the preceding car, (ii) keep the track of its preceding car as long as the speed limit is not violated. Though our work could be extended to include other objectives such as yaw control, we choose to closely investigate the reduction of energy consumption in this sequel due to the limited driving range of electric vehicles.
23 October 2019 in IEEE Transactions on Intelligent Transportation Systems
In this paper an ecological adaptive cruise controller to reduce the fuel consumption and ensure the safe inter-vehicle distance for vehicles with step-gear transmissions is presented. An optimal control strategy using reinforcement learning with a novel actor-gear-critic architecture is proposed to obtain the continuous traction force trajectory and the discrete gear shift schedule. The traction force is determined from an actor network to maintain a desired inter-vehicle distance which improves the driving safety in a car-following process. The gear shift schedule is derived from a gear network to reduce the fuel consumption. The control strategy is model-free and allows continuous online learning for different driving situations without look-ahead velocity information. Particularly the nonlinear vehicle dynamics, the nonlinear transmission efficiency map for different gear ratios, and the nonlinear fuel consumption map are learned for fuel consumption reduction. The proposed controller is evaluated for different driving scenarios to demonstrate its robustness. Furthermore simulation comparisons for different gear shift schedules and velocity trajectories are given underling the advantages in terms of fuel economy and driving safety.
29 May 2019 in IEEE Transactions on Control Systems Technology
This paper presents a novel robust model predictive control (RMPC) concept for linear time-invariant systems with a predictable additive disturbance and linear constraints on the state and the input. Major properties of the approach are that: 1) available knowledge of the disturbance is considered in the optimization and 2) the robustness and the performance are addressed separately. As a result, the control performance is optimized while a less conservative condition on constraint satisfaction and recursive feasibility compared to the existing RMPC schemes is obtained. Traditionally, the Lyapunov function is chosen as the optimum of the objective function which must usually be quadratic in terms of the state and the input and contain a terminal cost term. These standard assumptions for the stability may restrict the flexibility of the optimization problem formulation and, thus, limit the applicability of the related RMPC strategies. To overcome this limitation, this paper proposes an explicit Lyapunov function and ensures the input-to-state stability (ISS) with a quadratic constraint, allowing to use any arbitrary convex objective function. To evaluate the novel RMPC concept, a multiobjective adaptive cruise control (ACC) is proposed and a simulation study using measured velocity profiles for the leading vehicle on a highway is presented. In the evaluation, a less restrictive constraint tightening and a larger terminal constraint set compared to the classical RMPC policies could be found and multiple objectives including driving comfort, energy efficiency, stability, and robust recursive fulfillment of safety, velocity, and further physical constraints could be achieved with the novel RMPC concept.
13 September 2021 in IEEE Transactions on Intelligent Vehicles
In this paper a learning-based optimization method for online gear shift and velocity control is presented to reduce the fuel consumption and improve the driving comfort in a car-following process. The continuous traction force and the discrete gear shift are optimized jointly to improve both the powertrain operation and the longitudinal motion. The problem is formulated as a nonlinear mixed-integer optimization problem and solved based on adaptive dynamic programming. A major difference compared to existing approaches is that the developed control method is model-free, i.e. it does not rely on vehicle models. It can address system nonlinearities and adapt to changes in engine characteristics (e.g. consumption map) during vehicle driving. The computation is efficient and enables possible real-time implementation. The proposed control method is studied for an urban driving cycle to evaluate the control performance with respect to the fuel economy and the driving comfort. Simulations indicate that the host vehicle can reduce the fuel consumption by 5.03% and 1.12% for two consumption maps in comparison to the preceding while keeping a desired inter-vehicle distance. The results further show a decrease of 1.59% and 2.32% in fuel consumption compared to a linear quadratic controller with the same gear shift schedule.
10 July 2019 in IEEE Transactions on Vehicular Technology
In this paper an online gear shift and power split strategy for parallel hybrid electric vehicles (HEVs) is presented to optimize the fuel consumption. The gear shift control is implemented with a neural network (NN). The training of the NN is performed with data obtained from dynamic programming (DP) for different driving cycles. Simulation results indicate that the gear shift sequences and fuel consumption obtained from the NN and DP are very similar, underlining that the gear shift control based on the NN is near-optimal. Furthermore, the power split control is realized based on action-dependent heuristic dynamic programming (ADHDP). ADHDP does not need a system model and allows learning continuously. The power split control is therefore robust with respect to uncertainties and disturbances and adaptive with respect to various driving situations and driver behaviors. The gear shift control based on the NN and the power split control based on ADHDP are combined to an adaptive energy management strategy with possible real-time application, enabling online learning of the controller and preventing the curse of dimensionality. Simulations for different driving cycles and comparisons with optimal solutions by DP indicate that the proposed energy management strategy is robust, adaptive, and near-optimal.