We investigate electronic transport properties of as-grown and annealed n-type modulation-doped Al 0.15 Ga 0.85 As/GaAs 1−x Bi x ( x = 0 and 0.04) quantum well (QW) structures using magnetotransport measurements in the temperature range 4.2 K and 60 K and at magnetic fields up to 18 T. Thermal annealing process was applied at two different temperatures, 700 °C and 350 °C during 60 s and 180 s, respectively. We find that electron effective mass and 2D electron density in as-grown Bi-containing sample are slightly lower than that in Bi-free one. Furthermore, quantum electron mobility and quantum scattering time are observed to be decreased in Bi-containing samples. The annealing process at 700 °C causes a slight increase in electron effective mass and 2D electron density. A negligible decrease in electron effective mass and an increase in 2D electron density are determined following annealing at 350 °C. The observed change in electron effective mass following thermal annealing process is attributed to changing 2D electron density in the samples. No improvement on quantum electron mobility and quantum scattering time are observed following thermal annealing at both process temperatures. We determine that one electron subband (e1) for as-grown and annealed (at 700 °C for 60 s) Bi-containing QWs and two electron subbands (e1 and e2) for the annealed (at 350 °C for 180 s) GaAsBi QW sample and the Bi-free QW sample contribute to electronic transport. Our results reveal that there is no significant direct effect of Bi on effective electron mass, but an indirect effect, in which Bi can provoke changes in 2D electron density and hence causes not to observe actual band-edge electron mass but a deviation from its band-edge value. Therefore, it can be concluded that dispersion curve of conduction band does not change as an effect of Bi incorporation in GaAs.
Novel semi-transparent organic solar cells (ST-OSC) can be designed with high average visible transmittance (AVT) while at the same time exhibiting superior photovoltaic performance. This reach requires their design to be based not only on conventional window applications but also on functional industrial applications that require exceptional optical performance. In ST-OSC, high AVT can be achieved by photonic-based dielectric/metal/dielectric (DMD) transparent contact engineering. Functional optical modification can also be made with a fine-tuned design of DMD that includes a light management engineering-based approach. Thus, ST-OSCs can be suitable for aesthetic, colourful and decorative industrial windows that provide natural lighting. In this study, we determined optimal ST-OSCs based on a novel PTB7:PC71BM polymer blend with MoO3/Ag/WO3 asymmetric DMD top contact by examining extraordinary optical properties such as AVT, colour rendering index, correlated colour temperature and colour perception over 10 thousand designs. In addition to determining the optimality and extraordinary optical limits for PTB7, we also evaluated the photon-harvesting and photovoltaic performance of ST-OSCs from external quantum efficiency and quantum utilization efficiency. In optimal situations, ST-OSCs offering 48.75% AVT, 99.08 CRI, and sky-blue colours were designed and determined to generate short-circuit current densities of 9.88 mA·cm−2, 13.64 mA·cm−2, and 13.06 mA·cm−2, respectively.
In this study, the design, fabrication and detailed analysis of semi-transparent bifacial organic solar cells (ST-OSC) based on MoO3/Ag/WO3 (10/dm/dod nm) dielectric/metal/dielectric (DMD) transparent contact system integrated with PTB7 polymer were investigated. The study emphasizes the importance of designing transparent contact systems to optimize the solar cells’ transparency (average visible transmittance, AVT), color rendering (color rendering index, CRI), efficiency (power conversion efficiency, PCE), and bifaciality. The performance of three distinct configurations was examined in the AVTmax (47.14% AVT, 3.93% PCE), (CRIext)max (23.82% AVT, 6.21% PCE), and Extreme Color (26.34% AVT, 5.81% PCE). The theoretically predicted AVTs for these configurations were 48.75%, 22.29%, and 25.15%, respectively. The strong agreement between theoretical and observed outcomes confirmed the accuracy of the Transfer Matrix Model (TMM). Furthermore, the assessment of bifaciality performance exhibited that the AVTmax had a bifaciality factor of 0.94, with a PCE of 3.67% under top illumination and 3.93% under bottom illumination. The high bifaciality of the structure designed with TMM to maximize the AVT demonstrates the value of calculations prior to solar cell structure fabricating and the possibility of constructing high bifaciality structures using this technique.
This study uses deep Q‐learning reinforcement learning to introduce a novel optimization framework for semi‐transparent organic solar cells (ST‐OSCs). This approach integrates the Transfer Matrix Method with artificial intelligence to streamline design processes by addressing the dual challenge of achieving high visible light transparency and efficient photovoltaic performance. The research focuses on PBDB‐T:ITIC‐based active layers coupled with asymmetrical dielectric‐metal‐dielectric transparent contacts, optimizing layer thicknesses and material properties. The deep Q‐learning algorithm efficiently navigates the complex design space, achieving a maximum average visible transmittance of 48.97% while maintaining strong photo‐current density. This optimization balances transparency and absorption, which are critical for ST‐OSCs, by reducing reflection losses and enhancing photon management. The study demonstrates the effectiveness of reinforcement learning in handling intricate multi‐layer ST‐OSCs, surpassing traditional optimization techniques. Results highlight the potential of adaptive learning algorithms in identifying high‐performance material configurations, minimizing computational costs, and ensuring precision. This work underscores the transformative role of AI in renewable energy technologies, offering scalable, sustainable solutions to modern energy challenges. By advancing the integration of artificial intelligence and material science, this study opens new pathways for optimizing renewable energy technologies and improving the performance of optoelectronic devices.