24 February 2021 in Optics Express
Bioinspired structural colors are attracting increasing attention in photonics, display, labeling and so forth. High-resolution and stable coloration is significant but is challenging to be fabricated in a facile and low-cost way. Herein, multilayer architecture containing an internal nanocavity as the structural color unit is obtained conveniently by direct nanosecond laser printing in atmosphere condition. Arbitrary colorful patterns with submicron accuracy can be realized only by a single step. And such structural colors induced by inner structures in the interlayer are antipollutive, antioxidative and easy to clean.
11 January 2023 in Optics Express
Optical pulling is an attractive concept due to the counterintuitive feature, the profound mechanism underneath and promising applications. In recent ten years, optical pulling of micro-nano objects have been fully demonstrated. However, optical pulling of a macroscopic object is challenging. Herein, laser pulling of a macroscopic object is presented in rarefied gas. The pulling force is originated from the Kundsen force when a gauss laser beam irradiates a macroscopic structure composed of the absorptive bulk cross-linked graphene material and a SiO2 layer. A torsional pendulum device qualitatively presents the laser pulling phenomenon. A gravity pendulum device was used to further measure the pulling force that is more than three orders of magnitudes larger than the radiation pressure. This work expands the scope of optical pulling from microscale to macroscale and provides an effective technique approach for macroscopic optical manipulations.
3 January 2023 in Optics Express
Photothermal phenomenon is one of the natural responses in light-matter interactions in which the energy of the incident light is converted into heat, resulting in a temperature increase in the illuminated material. This effect has a direct influence on the refractive index of the material such that its change of spectral dependency with temperature can be exploited for different applications. However, it is also important to separate/identify the thermal effect from the optical/electronic resonance effect to expand potential applications of light-matter interactions. In this work, we demonstrate the use of a white-light interferometry approach combined with a windowed Fourier transform method and a consistency-checking peak-fitting method to obtain the refractive index of an Rh6G-ethanol dye solution with a sensitivity of about ∼10−6 (RIU) for the visible range. Moreover, we also perform both static and dynamic measurements to study the photothermal effect of the Rh6G solution under external excitation. Importantly, we separate the optical and thermal effects due to the external excitation and obtain very good agreement with the experimental results by modeling the relative refractive index of the Rh6G solution with an expression consisting of spectrally a Fano-like resonance term and a linear dependent thermal term. We find that the response due to the optical effect is about ∼0.2 × 10−3 of that due to the thermal effect in the low-light regime. Our approach to separating the optical and thermal effects could shed light on other fields for potential applications through precision measurements of the transmission phase or refractive index.
26 September 2019 in Optics Letters
Photonic crystals (PCs) are usually fabricated on bulk substrates which break the symmetry of the PC system for incidence from either side of the PCs. Here we report the fabrication of a free-standing 1D layered dielectric PC by using a two-beam holographic interference method. The free-standing PC exhibits distinct photonic bandgaps as well as Fabry–Perot oscillations in the photonic bands. Furthermore, we show that the PC can be modeled by an effective medium approach and obtain the reflection phase for the photonic bands of the PC. We have also performed full-wave simulations for the PC and obtained very good agreement with the experiment. The free-standing PC enables a better comparison between experiment and simulation, and importantly, it is flexible enabling new applications for PCs.
26 September 2023 in Optics Express
Light manipulation of graphene-based materials attracts much attentions. As a new light manipulation concept, optical pulling develops rapidly in the past decade. However, optical pulling of graphene in liquid is rarely reported. In this work, laser pulling of graphene nanosheets (GN) in pure water by using common gauss beams is presented. This phenomenon holds for multiple incident laser wavelengths including 405 nm, 488 nm, 532 nm and 650 nm. A particle image velocimetry software PIVlab is adopted to analyze the velocity field information of GN. The laser pulling velocity of the GN is approximately ∼ 0.5 mm/s corresponding to ∼ 103 body length/s, which increases with an increase of the incident laser energy. This work presents a contactless mothed to massively pull microscale graphene materials in simple liquid, which supplies a potential manipulation technique for micro-nanofluidic devices and also provides a platform to investigate laser-graphene interaction in a simple liquid phase medium.