3 February 2020 in IEEE Transactions on Electromagnetic Compatibility
In the article, the electromagnetic time reversal technique (EMTR) is studied in the electromagnetic compatibility context. The main issue addressed by this approach is to deal with electromagnetic (EM) radiating source identification. This article is intended to provide a time-domain (TD) study of EMTR in the near field (NF) and prove its efficiency in characterizing transient disturbances in power electronics. The reconstruction of EM emissions is based on two stages. First, the modeling process relies on the use of TD analytical expressions. Second, signal processing is referring to the time reversal technique, which defines an inverse problem resolution. The method proposes to identify a set of equivalent dipoles. The validation is carried out experimentally using a TD measurement bench. The main purposes of this method is to extract the dipoles locations, moments, and orientation. The magnetic field maps calculated at each time step using obtained equivalent sources are compared with measured distributions. Adequate agreement is achieved, which confirms the efficiency of the proposed method. In addition, for validation purposes, the equivalent model is compared with that obtained by a frequency-domain (FD) method based on the standard genetic algorithms. Unlike FD, TD investigations allow characterizing transient disturbances in power electronic systems that emit strong EM interferences, by finding a sufficient equivalent model valid on a wide frequency band at once.
20 December 2020 in IET Science, Measurement & Technology
This study presents a comparative study between two electromagnetic inverse methods based on electromagnetic time reversal (EMTR) technique and genetic algorithms (GAs) for radiating sources characterisation in the near field (NF). Indeed, frequency-inverse methods reveal insufficiencies in transient radiations study. For instance, it leads to a repetitive process for multiple distinct frequencies. To overcome the frequency method limitations, EM inverse method in time domain (TD) successively based on GA and EMTR technique are implemented using analytical equations governing equivalent dipoles radiations. The performance of the two methods is compared in terms of complexity, accuracy, and calculation time. A TD measurement test bench is given using the NF scanning technique. Experimental results confirm that both methods are efficient and provide adequate equivalent models. Nevertheless, GA-based method depends on simplifying assumptions and thus the convergence is not always guaranteed. Therefore, EMTR-based method is more suitable, particularly for high switching frequencies in electronics systems.
1 December 2024 in International Journal of Applied Power Engineering (IJAPE)
This paper presents a time-domain (TD) approach based on hybrid artificial intelligence (AI) to speed up convergence of radiating sources characterization in power electronics. To obtain a representative equivalent model of device under test, a dedicated optimization framework has been developed in TD using a particle swarm optimization (PSO) toolbox. In addition, for elementary feature extraction, a pseudo-Zernike moment invariant (PZMI) descriptor has been defined. Finally, with the aim of identifying remaining dipole parameters and classification problems, artificial neural networks (ANN) have been implemented. A coupling of TD electromagnetic (EM) inverse method based on a PSO algorithm along with PZMI and ANN application has been investigated and applied to a real test case. Experimental measurements have been conducted using the near-field scanning technique above an alternating current (AC)/direct current (DC) converter. Obtained results are discussed based on a comparison between measured and estimated EM field distributions using both the hybrid AI method and a conventional TD inverse method based on genetic algorithms (GA) only. This study confirms that, compared with those given by non-hybrid method, the proposed algorithm further improves the convergence speed while maintaining high accuracy. Hence, the present work offers an impressive perspective for radiated emissions characterization using hybrid AI algorithms.