Zongfa Li

Zongfa Li

Auto-generated profile, based on publicly available information

Zongfa Li

Western Research Institute, Yangtze University 5 , Karamay 834000

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2025 in Physics of Fluids
Verified
Journal Article
Closed access
WWWendong Wang
Wendong Wang
QSQinghao Sun
Qinghao Sun
ZLZongfa Li
Zongfa Li
YSYuliang Su
Yuliang Su
The spontaneous imbibition (SI) process within shale reservoirs is influenced by both capillary force and the osmotic pressure differential existing between formation water and fracturing fluid. To delve into this intricate mechanism, a numerical simulation study on shale SI is conducted, utilizing seepage theory, the osmotic pressure equation, and solute transport theory. A notable innovation of this research is the derivation of a control equation governing salt ion transport under oil–water two-phase flow conditions. Subsequently, a comprehensive mathematical model for shale SI, accounting for both capillary force and osmotic pressure, is established and solved through numerical simulation methods. The findings reveal that the osmotic pressure between high-salinity formation water and low-salinity fracturing fluid exerts a substantial influence on the imbibition process. It not only accelerates the advancing speed of the imbibition front but also augments the volume of imbibed fluid, thereby significantly enhancing the imbibition recovery ratio. Consequently, optimizing membrane efficiency and increasing the salinity difference emerge as an effective strategy to boost imbibition recovery. Conversely, the impact of hydrodynamic dispersion on salt concentration distribution and imbibition recovery ratio is found to be relatively modest. Overall, this study systematically elucidates the underlying mechanisms of osmotic pressure in the context of the imbibition process. The insights gleaned from this research are anticipated to provide crucial theoretical guidance for enhancing SI efficiency in shale oil reservoirs.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
ZLZongfa Li
Zongfa Li
LHLijuan Huang
Lijuan Huang
XZXiaosong Zhou
Xiaosong Zhou
XHXiaoyu Huang
Xiaoyu Huang
ZCZhiwei Chen
Zhiwei Chen
SRShaoran Ren
Shaoran Ren
Aiming at low permeability, high water content light reservoir with a recovery rate higher than 20%, an improved air injection enhanced heat flooding technology is applied by combining the combustion reaction flow and flue gas flooding mechanism. The method involves the injection of air into the reservoir, which reacts with the crude oil at temperatures ranging from 220 to 300 °C. This reaction consumes part of the oil, enabling effective evaporation and flow of the remaining oil. This process combines combustion reaction flow with flue gas flooding, using high-temperature oxidation reactions to mobilize residual oil. Experimental results from combustion tube tests demonstrate stable reaction fronts, peak temperatures reaching up to 550 °C, and a significant increase in recovery rates, reaching 73.8% in some cases. Field applications of this technology require maintaining high air flux and burning rates in low-permeability zones to ensure effective heat-driven evaporation. The geological model of the well group shows that the recovery factor of the target block can be increased by more than 20% by air injection based on the water drive recovery factor of 28%–30%. The oil exchange ratio can be less than 4000 sm3/m3 by optimizing the air injection rate and oxygen content. The research results provide technical feasibility for heat flooding to significantly improve oil flow and recovery in low-permeability light oil reservoirs.

1 December 2024 in Physics of Fluids
Verified
Journal Article
Closed access
ZLZongfa Li
Zongfa Li
XLXu Luo
Xu Luo
BKBahedawulieti Kanjibayi
Bahedawulieti Kanjibayi
YWYi Wu
Yi Wu
GYGuihua Yang
Guihua Yang
YZYuhui Zhou
Yuhui Zhou
Deep oil reservoirs, characterized by high temperature and high pressure, are conducive for enhancing the miscibility between gas and crude oil, thereby improving oil recovery. This paper focuses on a high-water-cut deep oilfield in Xinjiang and experimentally investigates the potential and influencing factors of gas flooding for enhancing oil recovery. These factors include permeability, type of injection gas, injection rate, injection pressure, and injection method. Based on geological characteristics, three types of experimental long-core samples: high permeability, medium permeability, and low permeability, were selected. Hydrocarbon gas injection experiments were conducted after water flooding at conditions of 112 °C and 55 MPa to evaluate displacement effects. Results indicated that high permeability cores exhibited the best displacement, with gas flooding recovery rates 39.53% higher than those from water flooding. Low permeability cores demonstrated a 35.46% increase in oil recovery, significantly surpassing the 29.31% increase observed in medium permeability layers. Among the four flooding media tested, CO2 was found to have the best displacement effect, increasing oil recovery by 33.22%, followed by hydrocarbon gas and associated gas, while N2 was the least effective (7.27%). Higher injection pressures (55 MPa) notably improved the final recovery degree, resulting in a 41.40% increase. Additionally, alternating injections of water and gas enhanced recovery by 13.02% compared to continuous gas injection. A lower injection rate of 0.5 ml/min improved recovery by 7% over 1 ml/min. Therefore, for medium permeability layers under high-water-cut conditions, the optimal gas injection scheme consists of using hydrocarbon gas as the injection medium, with an injection flow of 0.5 ml/min and a pressure of 55 MPa, employing a water–gas alternating injection mode. This study provides valuable experimental and theoretical support for enhancing oil recovery through gas flooding in high-water-cut deep reservoirs.

1 May 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YMYifan Ma
Yifan Ma
ZLZongfa Li
Zongfa Li
WLWeiwei Liu
Weiwei Liu
HZHui Zhao
Hui Zhao
GCGuodong Chen
Guodong Chen
Deep reservoirs have shown an advantage in synergistic oil production, geothermal development, and carbon sequestration, with great economic potential. To solve the problems of high-dimensional variables and poor convergence in the collaborative optimization of these three processes, this paper proposes a new algorithm called GRNN-assisted Surrogate Optimization Algorithm (GSOA) based on the generalized regression neural network (GRNN) classifier and the surrogate model co-optimization. GSOA enhances search space diversity via GRNN hierarchical prescreening and combines a Radial Basis Function surrogate model with Differential Evolution for efficient global optimization, mitigating computational inefficiency and local optima in high-dimensional problems. A numerical model for medium-high temperature reservoirs (56 × 45 × 7 grid, 115 °C, 45 MPa) was established, optimizing bottom hole pressures for net present value (NPV) maximization while balancing oil recovery, CO2 storage, and geothermal energy production. Simulations demonstrate that GSOA outperforms traditional surrogate-assisted optimization (SOA), achieving a 3.9% increase in cumulative oil production (284.9 × 103 m3 vs 274.3 × 103 m3), 5.2% higher CO2 storage (65.3 × 106 m3 vs 62.1 × 106 m3), 0.9% enhanced heat extraction (2.72 × 1013 J vs 2.69 × 1013 J), and 3.2% greater NPV (1.21 × 108 CNY vs 1.17 × 108 CNY). GSOA converges to peak NPV in 55 generations—52% faster than SOA (115 generations)—validating its robustness in CCUS (Carbon Capture, Utilization and Storage)-integrated geothermal systems. This research advances methodologies for CO2-enhanced oil recovery-geothermal synergy and supports carbon-neutral resource utilization.

1 November 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YHYongmao Hao
Yongmao Hao
LYLanqing Yang
Lanqing Yang
Shiyuan ZhanShiyuan Zhan
Shiyuan Zhan
ZLZongfa Li
Zongfa Li
GLGuangzhong Lv
Guangzhong Lv
FYFan Yang
Fan Yang
The aqueous phase in the porous medium separates CO2 and crude oil, significantly impacting CO2 flooding and underground storage. Molecular dynamics simulations were employed to investigate CO2–water–crude oil (modeled here by n-octane) systems. The influence of water film thickness ratio, temperature, and pressure on interfacial characteristics and CO2–oil miscibility was systematically analyzed. Simulations identified the water film thickness ratio as the critical factor governing CO2 breakthrough and miscibility. When this ratio reaches or exceeds 0.5, changes in interfacial parameters slow markedly, and CO2 essentially loses the ability to penetrate the water film. Consequently, the critical threshold for effective CO2 breakthrough and subsequent mixing with oil is a ratio below 0.5. Attributed to the dominant effect of molecular compression over the minor effect of increased CO2 accumulation at the interface, the increase in temperature (300–373 K) led to a decrease in interfacial tension (from 51.28 to 42.35 mN/m) and an increase in CO2 boundary area agglomeration density (0.092–0.164 g/cm3). The increase in pressure (10–35 MPa) led to a slight increase in interfacial tension (48.06–52.76 mN/m) and an increase in CO2 boundary area agglomeration density (0.113–0.167 g/cm3). Although the changes in temperature and pressure significantly change the interfacial properties, they do not change the ability of CO2 to break through the critical water film thickness ratio (0.5) or dominate the overall miscible process. This study provides vital theoretical insights into the microscopic phase equilibria of CO2–crude oil–water systems, offering valuable guidance for optimizing enhanced oil recovery (EOR) by CO2 and subsurface storage.

1 July 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
LHLijuan Huang
Lijuan Huang
YWYumeng Wang
Yumeng Wang
JYJiaxiang Yuan
Jiaxiang Yuan
TWTao Wang
Tao Wang
HSHaojun Song
Haojun Song
SRShaoran Ren
Shaoran Ren
To solve the problem that scale in oilfields can lead to a reduction of formation permeability and blockage of wellbore and production system pipelines, through the scale inhibitor-formation water compatibility experiment and the minimum effective scale inhibitor concentration experiment, three different types of surfactants are selected as adsorption promoters. Three different types of surfactants were selected as adsorption–desorption accelerators through dynamic core adsorption–desorption experiments. The results of the indoor experiment show that the three types of scale prevention agents selected can meet the environmental protection requirements of the sea area. The static scale prevention rate at high temperature (>120 °C) exceeds 80%, and the minimum effective concentration is less than 3.5 mg L−1. The preferred cation Gemini surfactant has a stable adsorption enhancement effect of the scale inhibitor under different water-bearing conditions and can effectively extend the squeezing life under complex formation conditions. The results improve the comprehensive economic benefits of the field and provide technical feasibility to significantly improve the scale prevention efficiency of the field.