18 July 2022 in IEEE Transactions on Geoscience and Remote Sensing
Nowadays, benefiting from its strong capability of nondestructive detection, the ground-penetrating radar (GPR) has been applied to detect and reconstruct underground targets and has drawn lots of attention both in military and civilian fields. However, in the processing of GPR imaging, due to the dispersion errors caused by random distribution of various particles in soil, conventional imaging methods have disadvantages of low signal-noise ratio (SNR), low resolution, and unbalanced amplitude. In this article, to achieve high resolution and high veracity on underground targets’ 3-D reconstruction, we improved the conventional reverse time migration (RTM) algorithm in perspective of medium constitutive relationship. Besides, we extended the improved RTM method in 3-D environments and reconstructed the 3-D structure of several underground targets. To make the RTM algorithm suitable for stepped frequency continuous wave (SFCW) GPR system, we generated three excitation signal models and analyzed the effect of different excitation signals on imaging performance. Finally, through the quantitative analysis of simulation and on-vehicle experimental results, we found that the 3-D images generated by improved RTM method had higher resolution, smaller measurement error, and higher veracity than those of conventional RTM method.
1 August 2023 in IEEE Geoscience and Remote Sensing Letters
Ground penetrating radar (GPR) is a non-destructive detection technology. It uses high frequency electromagnetic energy to locate targets underground. In the direction of motion, GPR can produce Bscan with good performance. The lateral image is typically constructed using the results of many detections. By integrating beamforming with stepped frequency continuous wave, we propose a method that increases the lateral detection performance. The performances of two beamforming methods in GPR are compared. We designed a 1 × 4 multi-static GPR and did two experiments. The findings demonstrate that the beamforming improves the lateral detection performance in comparison to single-static GPR. Compared with delay-and-sum methods, MVDR method has better performance in suppressing the sidelobe level and avoiding false targets.