Room-temperature-use phase change materials (PCMs) are of vital importance in combining the sustainable development of energy with human comfort. Here, a series of novel epoxy-based polymeric solid–solid PCMs (SSPCMs) were facilely prepared by UV grafting 1-octadecanethiol (ODT) onto an allyl-based epoxy resin (DADGEBA) via thiol–ene click chemistry followed by the epoxy–amine thermal curing process. Therefore, the grafted ODT can be tightly locked in a reliable three-dimensional crosslinking network of the epoxy resin, which provides the PCMs with excellent shape-stable property. Phase change and mechanical properties characterized by DSC, DMA, hardness test, and tensile test can be easily tuned by adjusting the mass ratio of DGEBA and the ODT-grafted-DADGEBA product (D18), which was characterized by FTIR and NMR. XRD and POM analyses proved the crystallinity of EPD18-X PCMs. The structure and morphology of the EPD18-X PCMs were characterized by visual images, SEM, and POM analyses. Microphase separation was observed in all the EPD18-X PCMs, and an obvious phase separation was observed in the EPD18-25 system. However, the phase separation gradually disappeared with the increasing of the D18 content. Thermal recycling tests showed that EPD18-X PCMs can remain stable after 50 DSC thermal cycles. Due to the unique strong encapsulated epoxy curing networks, EPD18-X PCMs have excellent thermal stability with the onset degradation temperature higher than 250 °C. Tunable EPD18-X systems can be applied for room-temperature-use thermal energy storage applications such as buildings, thermoregulated fabrics, and so on.
The preparation of highly incompatible interpenetrating polymer network systems with a high extent of phase mixing has been a challenging task because the thermodynamics of phase separation are so powerful. Here, we propose a facial strategy to design a ‘forced’ intermixing epoxy/polysiloxane network by utilizing a novel epoxy/polysiloxane monomer (SH-EP) in a one-pot synthesis. The relationship between the structure and properties is systematically investigated using FTIR spectrometry, rheology, SEM, and DMA. Impressively, the epoxy and polysiloxane networks can be driven to closely interpenetrate by their intrinsic motive force derived from the ‘forced’ sites in SH-EP, which in turn, may easily give rise to a bicontinuous morphology. In addition, the gelation time is systematically controlled by varying the polysiloxane content and pre-curing temperature. By tuning the gelation time, the extent of phase mixing and the degree of phase separation can be further regulated. The result is striking: for the first time, these highly incompatible epoxy/polysiloxane intermixing networks exhibit ultralow-temperature damping properties (tan δ > 0.3) over a very broad temperature range of 217 °C (from −114 °C to 103 °C). This finding may revolutionise the frontiers of materials knowledge.
22 April 2025 in Journal of Colloid and Interface Science