16 August 2022 in IEEE Electron Device Letters
The Radiofrequency (RF) industry needs surface acoustic wave (SAW) resonators with high-quality factors ( ${Q}$ ) and spurious-free response characteristics to also have steep roll-off and a flat passband. In this work, SAW resonators based on 36°YX-LiTaO $_{{3}} /$ SiO $_{{2}} /4\text{H}$ -SiC multilayer substrates are fabricated that can effectively suppress acoustic energy leakage. Finite element method (FEM) simulations show that the effective electromechanical coupling coefficient ( ${k}^{{2}}_{\text {eff}}$ ) of the multilayer structure SAW resonators can be improved by choosing SiO2 and 36°YX-LT layers of appropriate thickness, and it is the high acoustic velocity of the slow shear bulk wave in 4H-SiC that leads to the multilayer structure SAW resonators showing excellent performance in confining acoustic energy. However, from the slowness curve, we measure the power flow angle (PFA) to be 10°, which, if uncorrected, would lead to serious transverse modes between the resonant frequency ( ${f}_{\text {r}}$ ) and the antiresonant frequency $({f}_{\text {a}})$ . To counter this, a multilayer structure SAW resonator with transverse mode suppression is fabricated using interdigital transducers (IDT) with a tilted angle of 10°. The multilayer resonator displays an extremely high Bode- ${Q}$ of over 3500 and a high impedance ratio of 85 dB. As predicted by the simulation results, ${k}^{{2}}_{\text {eff}}$ is up to 12%, and an extremely high figure of merit (FOM) of 423 is achieved. The enhanced performance of SAW resonators demonstrated in this work can open a door for constructing high-performance SAW filters with low insertion loss and high stability characteristics.
5 September 2023 in IEEE Transactions on Electron Devices
High-performance wideband acoustic filters are urgently needed for communication systems with large volumes of data. Recently, multilayered surface acoustic wave (SAW) resonators have attracted wide attention as key components of acoustic filters. In our previous work, we proposed a shear-horizontal SAW (SH-SAW) resonator based on a 30° YX -LiNbO3/SiO2/Si substrate. This resonator achieved an effective electromechanical coupling coefficient ( ${k}^{{2}}_{\text {eff}}$ ) of 24.4% and a Bode- ${Q}_{\text {max}}$ of 1092. However, the admittance/conductance showed obvious transverse and longitudinal modes spurious that degraded the resonator’s performance. To address this issue, we adopted a tilted interdigital-transducer (IDT) design in this article, which combined dispersion/slowness characteristic analysis and tilted angle optimization using the finite-element method (FEM). The simulations and experimental results have verified the successful suppression of both transverse and longitudinal modes when the tilted angle of the IDT reaches 16°. Moreover, the adoption of the tilted IDT designs for spurious modes suppression does not result in the evident sacrifice of the ${k}^{{2}}_{\text {eff}}$ . The proposed resonator has the potential to be used in the development of acoustic filters with large bandwidth, low loss, and no ripples.
19 December 2023 in Carbon
25 March 2010 in Applied Optics
By considering the influence of the turn-off time and the modulation frequency of the acousto-optic (AO) modulator as well as the Gaussian spatial distribution of the photon density, we give a developed rate equation model for a diode-pumped dual-loss-modulated Q-switched and mode-locked (QML) laser with AO modulator and saturable absorber. With this developed model, the dual-loss-modulated QML laser characteristics, such as pulse width and pulse energy, can be numerically simulated, and the theoretical evaluations are in good agreement with the experimental results.
16 April 2024 in IEEE Transactions on Electron Devices
In this article, we studied the effect of radio frequency (RF) loss caused by parasitic surface conductivity (PSC) to surface acoustic wave (SAW) devices through a physical-model-based and universal method. First, through technology computer-aided design (TCAD) tools, the phenomenon of PSC attracting minority carriers to top part of Si to form an inversion layer was clearly displayed. Then, this influence was transformed into the reduction in the effective resistivity ( ${R}_{\text {eff}}{)}$ of homogeneous Si substrate using equivalent circuit model. Finally, ${R}_{\text {eff}}$ was converted into the dielectric loss tangent, which can be conveniently introduced to ANSYS electromagnetics (EM) models. This method is first used for coplanar waveguide (CPW), which is an excellent device for characterizing substrate RF loss. Using a similar method, the specific impact of PSC on SAW resonators based on 42°YX-LiTaO3 (LT)/SiO2/PSi/Si and 42°YX-LT/SiO2/Si substrate was also studied. It has been verified that PSC causes a decrease in Bode-Q of SAW resonators and deterioration in insertion loss (IL). And by calculating the changes in Bode-Q, we successfully separated substrate RF loss from other losses, such as acoustic loss. Simulations for both CPW and SAW devices have achieved good agreement with measured results. This method provides a convenient approach for analyzing the impact of PSC that exist in all similar structures on the performance of RF devices.