Metasurfaces consisting of electrically thin and densely packed planar arrays of subwavelength elements enable an unprecedented control of the impinging electromagnetic fields. Spatially modulated metasurfaces can efficiently tailor the spatial distribution of these fields with great flexibility. Similarly, time modulated metasurfaces can be successfully used to manipulate the frequency content and time variations of the impinging field. In this paper, we present time-modulated reflective metasurfaces that cause a frequency shift to the impinging radiation, thus realizing an artificial Doppler effect in a non-moving electrically thin structure. Starting from the theoretical analysis, we analytically derive the required time modulation of the surface admittance to achieve this effect, and present a realistic time-varying structure, based on a properly designed and dynamically tuned high-impedance surface. It is analytically and numerically demonstrated that the field emerging from the metasurface is up-/down-converted in frequency according to the modulation profile of the metasurface. The proposed metasurface concept, enabling a frequency modulation of the electromagnetic field “on-the-fly„, may find application in telecommunication, radar, and sensing scenarios.

So far, the environment has been considered as a source of fading, clutter, blockage, etc., with detrimental consequences for the efficiency and robustness of communication systems. However, the intense research developed toward beyond-5G communications is leading to a paradigm change, in which the environment is exploited as a new degree of freedom and plays an active role in achieving unprecedented system performances. For implementing this challenging paradigm, it has been recently proposed the use of intelligent surfaces able to control almost at will the propagation of electromagnetic waves. In this framework, metasurfaces have emerged as a promising solution, thanks to their field manipulation capabilities achieved through low-cost, lightweight, and planar structures. The aim of this paper is to review some recent applications of metasurfaces and cast them in the scenario of next-generation wireless systems. In particular, we show their potentialities in overcoming some detrimental effects presented by the environment in wireless communications, and discuss their crucial role towards the practical implementation of a smart electromagnetic environment.

Temporal metamaterials are artificial materials whose electromagnetic properties change over time. In analogy with spatial media and metamaterials, where their properties change smoothly or abruptly over space, temporal metamaterials can exhibit a smooth variation over time, realizing a temporal non-homogeneous medium, or a stepwise transition, and the temporal version of dielectric slabs or multilayer structures. In this Letter, we focus our attention on temporal multilayer structures, and we propose the synthesis of higher-order transfer functions by modeling the wave propagation through a generalized temporal multilayer structure, consisting of a cascade over time of different media. The tailoring of the scattering response of the temporal structure as a function of frequency is presented, deriving the corresponding scattering coefficients for a properly designed set of medium properties, i.e., permittivity and permeability, and application time, in analogy with what is typically done in optical and electromagnetic spatial multilayered structures. This allows us to design novel electromagnetic and optical devices with higher-order transfer functions by exploiting the temporal dimension instead of the spatial one.

Although cloaks are effective at suppressing the observability of static objects, they can be defeated when in motion. Here we discuss a general technique to cloak the motion of objects from static observers, based on compensating the Doppler shift associated with their motion with frequency conversion sustained by a spatiotemporally modulated cover. The concept is theoretically and numerically demonstrated in a system composed of a planar reflector covered by a spatiotemporally modulated slab. It is shown that, for properly selected modulation frequency, the composite system can appear to an external observer as stationary, even though it is actually moving. This concept may pave the way to the minimization of clutter produced by moving objects as well as to new directions in the science of cloaking.

We show that properly designed mantle cloaks, consisting of patterned metallic sheets placed around cylindrical monopoles, allow tightly packing the same antennas together in a highly dense telecommunication platform. Our experimental demonstration is applied to the relevant example of two cylindrical monopole radiators operating for 3G and 4G mobile communications. The two antennas are placed in close proximity, separated by 1/10 of the shorter operational wavelength, and, after cloaking, are shown to remarkably operate as if isolated in free-space. This result paves the way to unprecedented co-siting strategies for multiple antennas handling different services and installed in overcrowded platforms, such as communication towers, satellite payloads, aircrafts, or ship trees. More broadly, this work presents a significant application of cloaking technology to improve the efficiency of modern communication systems.

We present the design of a flat lens, made by a conventional material and an epsilon near-zero metamaterial, to plug up the aperture of a short horn antenna, in order to achieve radiation performances similar to the ones of the corresponding optimum horn over a broad frequency range. Lens operation is based on the phase-compensation concept: phase-fronts of the field propagating along the short flare of the horn propagate with different phase velocities in the two lens materials, resulting in an uniform phase distribution on the aperture. Starting from the theoretical study of the transmission properties of a bulk epsilon near-zero slab, we derive the analytical formulas for the design of the flat lens and validate them through full-wave numerical simulations. Then, a realistic version of the lens, realized with a wire-medium and exhibiting a near-zero real part of the effective permittivity in the frequency range of interest, is presented. Considering two examples working in the C-band, we show that the lens can be designed for both conical and pyramidal horn antennas. In both cases, the length of the horns is half the one of the corresponding optimum versions, while the obtained radiation performances are similar to those of the optimum horns over a broad frequency band. This result may open the door to several interesting applications in satellite and radar systems.