10 July 2015 in IEEE Transactions on Industrial Electronics
In this paper, a unified energy management scheme is proposed for renewable grid integrated systems with battery-supercapacitor hybrid storage. The intermittent nature of renewable-energy resources (RES), coupled with the unpredictable changes in the load, demands high-power and high-energy-density storage systems to coexist in today's microgrid environment. The proposed scheme dynamically changes the modes of renewable integrated systems based on the availability of RES power and changes in load as well. The participation of battery-supercapacitor storage to handle sudden/average changes in power surges results in fast dc link voltage regulation, effective energy management, and reduced current stress on battery. In addition, the proposed energy management scheme enables the real power transfer along with ancillary services such as current harmonic mitigation, reactive power support, and power factor improvement at the point of common coupling. The proposed scheme is validated through both simulation and experimental studies.
8 July 2014 in IEEE Transactions on Industrial Electronics
Exploiting the rich switching redundancies of the dual inverter, new hybrid pulsewidth-modulation (PWM) switching methods are proposed in this paper using the degree of freedom of operating the individual inverters independently, in addition to exercising the degree of freedom of controlling the switching action of the individual legs independently. Two voltage entities, namely, common-mode voltage (CMV) and differential-mode voltage are identified in the dual inverter, and all hybrid PWMs are envisaged aimed at reducing and also eliminating the CMV in it. The effects of such attempts on motor shaft voltage and also the motor bearing currents are presented in detail. Furthermore, bearing current profiles of an open-end winding induction motor are also presented with both conventional and hybrid PWMs proposed in this paper. Electric discharge machining discharge currents are completely eliminated with the use of all hybrid PWM methods proposed in this paper. In addition, implications of completely eliminating the CMV are also presented in this paper. All hybrid PWMs proposed in this paper are first simulated using MATLAB and are experimentally verified on a dual two-level inverter feeding a 1.1-kW 415-V 3-φ open-end winding induction motor drive.
28 May 2008 in IEEE Transactions on Industrial Electronics
VSVeeramraju T. Somasekhar
An open-end winding induction-motor drive with two two-level inverters achieves three-level inversion. The drawback of this configuration is the presence of a high zero-sequence current, stressing the semiconductor switching devices and the motor. To avoid this, two isolated dc power supplies are needed to feed individual inverters. In this paper, it is shown that it is possible to operate this drive with a single dc power supply, with reasonable engineering compromises. The new decoupled space-vector-based pulsewidth modulation (PWM) strategy proposed in this paper achieves this objective. This PWM strategy exploits the dependence of the zero-sequence voltage on the placement of the zero-vector of individual inverters. It is shown that the zero-sequence voltage of the dual-inverter system is suppressed by forcing the zero-sequence voltage of the individual inverters to a value of zero, in the average sense, in each sampling-time interval. This strategy, therefore, achieves a dynamic balancing of the zero-sequence current. It is also shown that this PWM scheme achieves the center spacing of effective-time period for the dual-inverter drive and its associated advantages. In addition, the effect of the placement of the zero-vector for individual inverters on the dual-inverter drive is investigated, and the experimental results are presented.
26 September 2014 in IEEE Transactions on Energy Conversion
In this paper, fast acting dc-link voltage-based energy management schemes are proposed for a hybrid energy storage system fed by solar photovoltaic (PV) energy. Using the proposed control schemes, quick fluctuations of load are supplied by the supercapacitors and the average load demand is controlled by the batteries. Fast dc-link voltage, effective energy management, and reduced current stress on battery are the main features achieved from the proposed control schemes. The effectiveness of the proposed control schemes are compared with the unified cascaded control. Small-signal control gains are formulated to design the voltage and current loops of the proposed energy management schemes. Detailed stability analysis is also presented to find the boundary values of compensator gains. In addition, a high-gain PV converter is proposed for extraction of maximum power from the solar panels. High voltage gain, reduced reverse recovery of diodes, and less duty cycle operation are the key features obtained from the proposed high-gain converter. The validity of the proposed energy management schemes with high-gain converter is verified by the detailed simulation and experimental studies.
24 August 2012 in IEEE Transactions on Power Electronics
This paper presents investigations on current ripple in a dual 2-level inverter feeding an open-end winding induction motor drive. Pulsewidth modulations (PWMs) for the independently controlled inverters are implemented using a simple effective time placement affected by offset-time concept, thus, eliminating the use of sector identification and lookup tables. Analytical expressions for ripple content in the motor phase current are developed and a current trajectory is theoretically obtained directly from the switching states of the dual inverter in a stationary reference frame. In addition, this paper also describes a current ripple trajectory in the motor by exploring the freedom of independently operating the individual inverters with different PWMs. Based on the analysis, discontinuous PWMs are employed for the individually inverters that not only offer the advantage of reducing the total switching commutations in the inverters but also reduces the current ripple. Analytical expression for the RMS ripple current and variation in RMS ripple current in one cycle of operation for different PWMs are also presented for the entire speed range of the dual-inverter drive. The performance of the dual-inverter drive with the proposed PWM variants is first studied analytically and then verified by performing suitable experiments on a 1-kW open-end winding induction motor drive.
21 November 2013 in IEEE Transactions on Sustainable Energy
This paper proposes a control scheme to control the microgrid side voltage-source converter (μG-VSC) using instantaneous symmetrical components theory. The μ G-VSC with proposed control can be utilized 1) as a bidirectional power sharing converter to control the power flow from the dc side to the ac side and vice versa, based on renewable power available at the dc link; 2) as a power quality compensator with the features of reactive power compensation, load balancing, and mitigation of current harmonics generated by nonlinear loads at the point of common coupling, thus enabling the grid to supply only sinusoidal current at unity power factor; and 3) to damp out the oscillations in the μG-VSC currents effectively using damping filter in the control algorithm. The mathematical models are derived and stability aspects are analyzed in detail through the frequency domain approach. The multifunctional features of the proposed control algorithm are demonstrated using extensive simulation studies and are also validated through experimental results.