Acidizing is one of the most useful methods in the oil well stimulations. This treatment technique creates capillary wormholes in the carbonate formations to enhanced fluids flow production of a reservoir. One of the main indexes for recognizing the wormhole characterization is the pore volume to breakthrough number. Therefore, calculating this number is one of the main goals in the carbonate acidizing. Obtaining this number is always required for experimental works, which needs time, energy and cost. In this article, an empirical model was used to evaluate carbonate acidizing procedure in the limestone and dolomite cores as the carbonate cores. This empirical model measures the number of wormholes formed in the carbonate cores after acid injection by using the conservation of mass law. In this method, the transport relative reaction rates of acid and core inside the structure of wormhole was maintained during the wormhole creation process. Growing the wormhole in the carbonate formation was developed step by step. Changes in acid concentration as an injected fluid flow were accounted for in this empirical model. Also, the changes in carbonate porosity, the effect of Damköhler number, and injection rate were included in the model. Two types of carbonate rocks and five types of acids with different molar masses were used in this model for the analysis and validation of the model. The results from experimental works was significance and justifies the use of use of the law for mass transport and chemical reactions. Evaluation of the developed model with other experimental and numerical results gave an excellent assessment of 95.45% for the average accuracy and 0.9933 for the average coefficient of determination. Therefore, an empirical technique to approximate the pore volumes to breakthrough number in the limestone and dolomite cores with high accuracy using physical core and acid properties is proposed.
Industrial globalization and urbanization has placed man on a path for the quest of energy. Conspicuously there are various types and forms of energy with established technologies on harnessing and utilization wherein fossil fuel still remains the cheapest with straightforward application. Although, conventional fossil fuel resources are depleting because of population growth, unconventional reservoirs are exploited daily with limited production due to inadequate and expensive technology making them stand at approximately 9.1 trillion barrels poised to quell the world’s energy insecurity for the next 100 years. The underlying basis for the high-cost of unconventional reservoirs upgrading is the hydrogen required to seal the alkyl chain after cracking to form low molecular weight hydrocarbons. Therefore, in this chapter we aim to provide a comprehensive review of in-situ generation of hydrogen from syngas via water gas shift reaction for the catalytic upgrading of heavy crude oil and bitumen by analyzing the gas chromatography results of gaseous effluents for the presence of syngas in the various works cited. Although, heavy crude oil and bitumen are non-renewable the upgrading method selected is tenable, appropriately the overall technology is partially sustainable.