1 January 2013 in Mathematical Problems in Engineering
Significant change of wellbore and surrounding formation temperatures during the whole drilling process for oil and gas resources often leads by annulus fluid fluxes into formation and may pose a threat to operational security of drilling and completion process. Based on energy exchange mechanisms of wellbore and formation systems during circulation and shut-in stages under lost circulation conditions, a set of partial differential equations were developed to account for the transient heat exchange process between wellbore and formation. A finite difference method was used to solve the transient heat transfer models, which enables the wellbore and formation temperature profiles to be accurately predicted. Moreover, heat exchange generated by heat convection due to circulation losses to the rock surrounding a well was also considered in the mathematical model. The results indicated that the lost circulation zone and the casing programme had significant effects on the temperature distributions of wellbore and formation. The disturbance distance of formation temperature was influenced by circulation and shut-in stages. A comparative perfection theoretical basis for temperature distribution of wellbore-formation system in a deep well drilling was developed in presence of lost circulation.
1 June 2020 in Journal of Petroleum Science and Engineering
27 November 2023 in ACS Omega
The integrity of the cement sheath is crucial for ensuring the long-term safe and efficient production of oil and gas wells. The mechanical properties of the cement sheath are improved by optimizing the cement slurry to match the actual operating conditions, further enhancing the wellbore integrity. In high-temperature and high-pressure (HTHP) conditions, a mechanics model of casing-cement sheath-formation was developed based on the thick-walled cylinder theory, considering the coupling effect of temperature and pressure as well as elastic and plastic deformation of the cement sheath. The relationship between the mechanical parameters of the cement sheath, such as elastic modulus, Poisson's ratio, and yield strength, and casing pressure under different temperatures was analyzed based on the simulation results. A control chart of the mechanical properties of the cement sheath under high-temperature and high-pressure environments was subsequently developed. It was concluded that the elastic deformation of the cement sheath occurs first followed by plastic deformation as the casing pressure increases, corresponding to the yielding point of tangential stress on the cement sheath. The cement sheath is more prone to failure in high-temperature conditions due to thermal stress. Sensitivity analysis revealed that a cement sheath with a low elastic modulus and high yield strength contributes to enhancing its integrity. The developed control chart enables a quick and quantitative estimation of whether the cement sheath meets the requirements of downhole conditions. Most importantly, the cement slurry is optimized, based on the theoretical method, to improve the seal integrity of the cement sheath. This study provides a quantitative evaluation of cement slurry optimization and offers practical guidance for managing the wellbore integrity by identifying the mechanical parameters of cement sheaths under operating conditions.
28 April 2025 in ACS Omega