11 November 2021 in Geofluids
In order to optimize the arrangement of cutting holes in tunnel blast in Dahongshan Copper Mine, theoretical analysis and numerical simulation were combined to preliminarily determine the diameter of the hollow hole and the distance between the charge hole and the hollow hole during cut blast, which was verified through the field blast test. The research results show that with the increase of the hole diameter, the peak compressive stress of rock surrounding the empty hole gradually decreases, and the peak tensile stress gradually increases, which is consistent with the calculation results; when the hole diameter is 10 cm, the two first blast holes are arranged horizontally and 30 cm from the empty hole, two second blast holes are arranged vertically and 40 cm away from the empty hole, and the four third blast holes are arranged at a horizontal distance of 45 cm and a vertical distance of 45 cm from the empty hole; the contour area in numerical simulation is the maximum. The difference in contour area, contour width, and contour and contour height between the measured value and the simulation result is 5.3%, 3.3%, and 3.4%, respectively, indicating that the combination of theoretical calculation and numerical simulation is suitable for prediction of cavity section after blast in tunnel excavation.
1 June 2026 in AIP Advances
The dynamic mechanical response of sandstone–mudstone composite specimens under impact loading is influenced by wave-impedance mismatch and layer-thickness configuration. Based on impact tests conducted on specimens with different sandstone-to-mudstone thickness ratios, the evolution of stress-wave propagation, energy distribution, and failure behavior was systematically analyzed. Results show that increasing sandstone thickness modifies the equivalent wave-propagation response of the composite specimen, thereby reducing wave reflection and promoting energy transmission, and this effect gradually weakens as impact velocity increases. The peak dynamic stress increases markedly with strain rate, while the characteristic double-peak feature in the stress–strain curves gradually diminishes as sandstone thickness increases. Energy analysis reveals that the absorbed energy displays a non-monotonic dependence on thickness ratio, reaching a minimum at equal sandstone and mudstone thicknesses. Failure observations show that, with increasing sandstone thickness, crack initiation shifts from the mudstone interior toward the interface, accompanied by reduced crack deflection during propagation across the interface. Correspondingly, fragmentation characteristics indicate that the sandstone primarily contributes to impact energy transmission, whereas the mudstone dominates energy dissipation, and its fractal features dominate the composite’s fractal behavior. These findings provide a mechanistic basis for assessing dynamic failure and wellbore instability risks during gas drilling in interbedded sandstone–mudstone formations.