9 January 2019 in Environmental Science: Water Research & Technology
Chlorophenolic pollutants are considered a serious environmental threat when disposed of without proper treatment. Moreover, increasingly stringent regulations towards effluent quality result in a growing interest in upgrading conventional wastewater treatment to reduce pollutant concentrations to acceptable levels. Among the wide range of treatment options, biological and ozone-based oxidation processes are already well defined for the degradation of chlorophenolic compounds. The main objective of this review is to highlight relevant knowledge gaps and research needs on chlorophenol degradation by applying biological and/or ozone-based oxidation techniques. The main research trends towards chlorophenol biodegradation are the use of specific cultures adapted to the pollutant and co-metabolic biodegradation. More recently, novel biological processes such as biomass immobilization and granular activated sludge were reported. These techniques possess the ability to protect the microorganisms from higher toxic pollutant concentrations. Only a few authors reported the use of mixed cultures and the effects of acclimated biomass to enhance the biodegradation process. However, conventional biological processes do not always achieve satisfactory results, opening the possibility for ozone-based oxidation technologies to degrade the refractory compounds into more biodegradable intermediates. The research objectives in many studies on chlorophenol ozonation consider the degradation of single pollutants and/or the enhancement of the oxidative potential using catalysts or UV light. Only a few attempts were reported investigating chlorophenol degradation in multiple substrate solutions. Also, the need for an additional toxicity and/or biodegradability assessment using microorganisms representative for activated sludge is clear; all the more when assessment of effects on a totally different microbial community is desired.
1 June 2021 in Journal of Environmental Management
1 March 2022 in Science of The Total Environment
The negative impact of agriculture on the quality of local water streams is widely recognized. Fertilizer residues not taken up by the crops leach into the drainage water and enter the surface water, resulting in eutrophication. Despite various initiatives to prevent this leaching by optimizing fertilizer schemes, the desired effect was not achieved, and the focus has shifted to denitrifying end-of-pipe techniques. Because the available area for installing such treatment systems is often limited, the development of intensified systems is a trend that has emerged recently. In this scope, the main goal of this study was therefore to investigate the suitability of a denitrifying Moving Bed Bioreactor (MBBR) as a low footprint technology, which can compete with conventional technologies. Two parallel lab-scale pilot MBBRs, one at low temperature and one at ambient temperature, were operated for 850 days to investigate the effectiveness and robustness under changing process parameters (hydraulic retention time (HRT), temperature, shutdown). Eventually, the system was scaled up to a full-scale installation and monitored during a full drainage season in the field. The pilot-scale MBBRs achieved removal efficiencies above 90% under optimal conditions (high C/N ratio and minimal HRT of 8 h), even while operating at low temperatures. The robustness of the system was also demonstrated by the immediate start-up after a shutdown period of 220 days. Overall, the full-scale MBBR treated 2910.1 m3 drainage water and removed approximately 59 kg NO3-N. Unfortunately, the average removal efficiency, i.e., 70%, was lower than the lab-scale system, but by intensifying the mixing in the MBBR, improved results were obtained. Nitrite accumulation was furthermore also prevented.