29 August 2011 in Physics Letters A
14 May 2013 in Contributions to Plasma Physics
23 March 2021 in Plasma Physics Reports
The basic physical methods of disinfection of air, water, and surfaces, such as filtration, ozonation, exposure to ultraviolet radiation, photocatalysis, cold plasma, electric discharges, and electroporation in an electric field are reviewed. The main attention is paid to the consideration of traditional and new methods of air disinfection. Recommendations on application of pulsed UV radiation are given. The possibilities of the electric field application for water and air disinfection are analyzed.
28 February 2002 in Quantum Electronics
1 August 2019 in Plasma Sources Science and Technology
In this study we summarize our experimental results regarding the influence of artificial bubbles, introduced in bulk liquid and deposited on the surface of electrodes, on the pulsed electrical breakdown of water with conductivity of 35 and 330 μ S cm −1 in ‘pin-to-rod’ geometry. A comparative study is completed for four different configurations of bubbles: (1) no bubbles at all; (2) bubbles only in bulk liquid; (3) bubbles only on the surface of electrodes; (4) bubbles both in bulk liquid and on the surface. Both volumetric and surface bubbles were revealed to change the breakdown mechanism at the near-breakdown voltage in two different ways, based on plasma channel propagation speed.
12 November 2009 in Physics of Plasmas
Influence of high-voltage (1–11 kV) pulses of nanosecond (20 ns) duration on microparticles levitating in a rf plasma is studied. It is shown that the pulses produce significant influence on the plasma, causing perturbations with the relaxation time of the order of . This time is sufficient for the microparticle to acquire significant kinetic energy. Application of repetitive pulses leads to the vertical oscillations of the microparticles. Clusters, consisting of small number of microparticles, exhibit parametric instabilities of horizontal modes under the effect of repetitive pulses. It was shown that the parametric instability is caused by the vertical oscillations of the microparticles in the nonuniform environment of the sheath.