The preparation of self-supporting anion exchange membranes with enhanced mechanical strength and ultrathin thickness is still a challenge to improve the performance of fuel cells. In this work, we developed 9-dodecylidene-9H-fluorene (DDF) as a branched monomer to construct branched structures based on poly(arylene piperidinium)s. After introducing a 2.5% molar ratio of DDF, quaternized poly(piperidinium-triphenyl-dodecylidenefluorene) (PPTDF-QA) possesses low water swelling (below 25% at 80 °C) and high mechanical strength (over 70 MPa). The obvious phase-separation behavior of the branched membranes induced by the long alkyl chain improves hydroxide conductivity which reaches 168 mS cm−1 at 80 °C. Meanwhile, the thickness of branched PPTDF-QA can be optimized to 8 μm. The present work reveals that a facile branched monomer can promote the formation of a microphase-separated morphology of the membrane to fabricate high-performance anion exchange membranes.
The development of anhydrous high-temperature proton-exchange membranes (HT-PEMs) combining durable high proton conductivity and modest mechanical properties is a huge challenge to macromolecular design and engineering. HT-PEMs with microporous structures, constructed by the inefficient chain packing of contorted and rigid polymer backbones with imidazole, are reported for the first time. It is found that the widespread and interconnected microporosity of the polymers endows the HT-PEMs with an excellent phosphoric acid (PA) doping level (ADL) and a corresponding superhigh proton conductivity, as well as suitable mechanical properties and PA-retention ability. An outstanding proton conductivity of 330.3 mS cm−1 is obtained at 180 °C under an anhydrous atmosphere, which is superior to those of reported HT-PEMs with far higher ADLs (<260 mS cm−1). The high and stable proton conductivity appears to be related to the interconnected intrinsic microporosity, which increases the PA storage and provides proton-carriers with several highways for fast transport.