14 August 2019 in IEEE Transactions on Industrial Electronics
Digital power management systems allow power converters to operate with multiple changes in voltage reference. This asks for a new paradigm that shifts from achieving faster response to achieving best efficiency during multiple transients, with transient being eventually time-constrained. State-space based design of the control system fits perfectly this goal since it is a time-domain design tool. It can further be enhanced with a Linear Quadratic Regulator (LQR) optimization, configured with converter loss equation as cost function. The LQR mathematics guarantees a solution to the Algebraic Riccati Equation that produces the best system efficiency for the converter system during multiple transients. This paper documents the design of the LQR control system having converter loss as a cost function and demonstrates the advantages of this method. The closed-loop control software yields very simple, running with a 250 kHz sampling frequency capability on a general-use Microchip microcontroller platform. While a loss reduction of 2.5% is demonstrated by experiment in our setup, the advantage depends on the actual system work profile.
7 November 2004 in IEE Proceedings - Electric Power Applications
Several topologies of three-phase low-harmonic diode rectifiers equipped with inductors, capacitors and diodes, based on an original solution, are presented. Inductors and capacitors are used in conjunction with the three-phase diode rectifier bridge to improve the waveform of the currents drawn from the utility grid. For the basic variant of the three-phase rectifier, representative characteristics and design elements are presented. Starting from this configuration, an AC/DC converter with small holding current and a four-quadrant frequency converter are proposed. The operation of the proposed converters is analysed and, on this basis, design considerations are reviewed. Several possible applications of the converter variants are mentioned. Analytically obtained results have bee experimentally verified.
22 March 2012 in Applied Composite Materials
5 June 2008 in IET Power Electronics
A new topology for a two-quadrant converter is presented. In the AC/DC transfer mode, the converter works as a rectifier with near sinusoidal input currents, whereas in the DC/AC transfer mode, it works as a square-wave pulse switching inverter. The converter is characterised by smaller power losses and reduced electromagnetic interference problems. Possible applications in adjustable speed drive with regenerative braking, wind energy conversion systems and small hydro interconnections with induction generators are also discussed.
26 September 2011 in IEEE Transactions on Industrial Electronics
This paper presents a new hybrid rectifier with near-sinusoidal input currents (RNSIC) converter which increases the performances of classic RNSIC converters. The proposed solution is technically and economically competitive with three-phase diode rectifiers with passive filters. Simulation and experimental results from a laboratory prototype are shown to confirm the validity of the proposed converter.