1 March 2016 in Measurement
1 January 2014 in Journal of Applied Geodesy
Image Assisted Total Stations (IATS) unify geodetic precision of total stations with areal coverage of images. The concept of using two IATS devices for high-resolution, long-range stereo survey of georisk areas has been investigated in the EU-FP7 project DE-MONTES (www.de-montes.eu). The paper presents the used methodology and compares the main features with other terrestrial geodetic geo-monitoring methods. The theoretically achievable accuracy of the measurement systemis derived and verified by ground truth data of a distant clay pit slope and simulated deformations. It is shown that the stereo IATS concept is able to obtain higher precision in the determination of 3D deformations than other systems of comparable sensor establishment effort.
23 November 2016 in Journal of Applied Geodesy
The technique of Image Assisted Total Stations (IATS) has been studied for over ten years and is composed of two major parts: one is the calibration procedure which combines the relationship between the camera system and the theodolite system; the other is the automatic target detection on the image by various methods of photogrammetry or computer vision. Several calibration methods have been developed, mostly using prototypes with an add-on camera rigidly mounted on the total station. However, these prototypes are not commercially available. This paper proposes a calibration method based on Leica MS50 which has two built-in cameras each with a resolution of 2560 × 1920 px: an overview camera and a telescope (on-axis) camera. Our work in this paper is based on the on-axis camera which uses the 30-times magnification of the telescope. The calibration consists of 7 parameters to estimate. We use coded targets, which are common tools in photogrammetry for orientation, to detect different targets in IATS images instead of prisms and traditional ATR functions. We test and verify the efficiency and stability of this monitoring method with multi-target.