Electrospun polyvinylidene fluoride (PVDF) fiber mats with average fiber diameters (≈200 nm, ≈2000 nm) were fabricated by controlled electrospinning conditions. These fiber mats were polarized using a custom-made device to enhance the formation of the electret β-phase ferroelectric property of the fibers by simultaneous uniaxial stretching of the fiber mat and heating the mat to the Curie temperature of the PVDF polymer in a strong electric field of 2.5 kV/cm. Scanning electron microscopy, Fourier transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry and Brunauer-Emmett-Teller (BET) surface area analyses were performed to characterize both the internal and external morphologies of the fiber mat samples to study polarization-associated changes. MATLAB simulations revealed the changes in the paths of the electric fields and the magnetic flux inside the polarization field with inclusion of the ferroelectric fiber mats. Both polarized and unpolarized fiber mats were challenged as filters against NaCl particles with average particle diameters of about 150 nm using a TSI 8130 to study capture efficiencies and relative pressure drops. Twelve filter experiments were conducted on each sample at one month time intervals between experiments to evaluate the reduction of the polarization enhancement over time. The results showed negligible polarization loss for the 200-nm fiber sample. The polarized mats had the highest filter efficiencies and lowest pressure drops.
Atomic scale features of polyvinylidene fluoride molecules (PVDF) were observed with aberration corrected transmission electron microscopy. Thin, self-supporting PVDF nanofibers were used to create images that show conformations and relative locations of atoms in segments of polymer molecules, particularly segments near the surface of the nanofiber. Rows of CF2 atomic groups, at 0.25 nm intervals, which marked the paths of segments of the PVDF molecules, were seen. The fact that an electron microscope image of a segment of a PVDF molecule depended upon the particular azimuthal direction, along which the segment was viewed, enabled observation of twist around the molecular axis. The 0.2 nm side-by-side distance between the two fluorine atoms attached to the same carbon atom was clearly resolved. Morphological and chemical changes produced by energetic electrons, ranging from no change to fiber scission, over many orders of magnitude of electrons per unit area, promise quantitative new insights into radiation chemistry. Relative movements of segments of molecules were observed. Promising synergism between high resolution electron microscopy and molecular dynamic modeling was demonstrated. This paper is at the threshold of growing usefulness of electron microscopy to the science and engineering of polymer and other molecules.
3 June 2019 in IEEE Transactions on Industry Applications
Rapidly growing needs for large-scale industrial production of polymer nanofibers produced by electrospinning require better control of electrospinning. In this paper, the capability of electrospinning polymer nanofibers with desired diameter and morphology was demonstrated. Concentration of the polymer solution, together with electrical conductivity and surface tension of the polymer solution, were adjusted to control the diameter and morphology of electrospun nanofiber. Nanofibers of polyacrylonitrile and polyvinylidene fluoride were successfully electrospun, with average diameters in the range from 100 nm to 400 nm. Real-time optical and electrical observations of electrospinning phenomena and adjustments of experimental variables in an electrospinning process contribute to a feedback system for online controlled electrospinning, which requires a multi-disciplinary approach including chemistry, electrical engineering, and material science.
Transmission electron micrograph images, made at high magnification, of electrospun nanofibers of polyvinylidene fluoride showed rows of dark dots, separated by about 0.24 nm, along segments of molecules. The thin fibers supported themselves across tiny holes, so there was no support material in the field of view. The dots were seen because the electron density of the CF2 groups is three times that of the intervening CH2 groups. The polymer nanofibers contained crystals with the polymer chains aligned predominately along the axis of the fiber. A significant degree of long-range translational symmetry, associated with the planar zigzag of backbone carbon atoms and the average lateral separation of the molecules, was maintained as the radiation gradually modified the polymer molecules. These high magnification images showed surprising persistence of the chain-like morphology and segmental motion. Primary radiation damage events were dominant. Many more numerous and damaging secondary radiation events that are encountered in thicker samples, or in support films were almost completely avoided, since the only nearby material where secondary radiation could be generated was in the very thin fiber. The nanofibers contained from 50 to a few hundred molecules in a typical cross section. Irradiation severed the molecules at slow rates until only two or three molecules remained in the fiber, and finally the fiber broke. Evidence was noted that irradiation with electrons also caused loss of fluorine atoms, cross-linking, and chain scission. The entire observed segments of the nanofibers were small enough for detailed comparison of images with calculated molecular models