3 November 2022 in Nature Communications
Detection and recognition of latent fingerprints play crucial roles in identification and security. However, the separation of sensor, memory, and processor in conventional ex-situ fingerprint recognition system seriously deteriorates the latency of decision-making and inevitably increases the overall computing power. In this work, a photoelectronic reservoir computing (RC) system, consisting of DUV photo-synapses and nonvolatile memristor array, is developed to detect and recognize the latent fingerprint with in-sensor and parallel in-memory computing. Through the Ga-rich design, we achieve amorphous GaOx (a-GaOx) photo-synapses with an enhanced persistent photoconductivity (PPC) effect. The PPC effect, which induces nonlinearly tunable conductivity, renders the a-GaOx photo-synapses an ideal deep ultraviolet (DUV) photoelectronic reservoir, thus mapping the complex input vector into a dimensionality-reduced output vector. Connecting the reservoirs and a memristor array, we further construct an in-sensor RC system for latent fingerprint identification. The system maintains over 90% recognition accuracy for latent fingerprint within 15% stochastic noise level via the proposed dual-feature strategy. This work provides a subversive prototype system of DUV in-sensor RC for highly efficient recognition of latent fingerprints.
13 December 2021 in Nature Communications
The resistive switching effect in memristors typically stems from the formation and rupture of localized conductive filament paths, and HfO2 has been accepted as one of the most promising resistive switching materials. However, the dynamic changes in the resistive switching process, including the composition and structure of conductive filaments, and especially the evolution of conductive filament surroundings, remain controversial in HfO2-based memristors. Here, the conductive filament system in the amorphous HfO2-based memristors with various top electrodes is revealed to be with a quasi-core-shell structure consisting of metallic hexagonal-Hf6O and its crystalline surroundings (monoclinic or tetragonal HfOx). The phase of the HfOx shell varies with the oxygen reservation capability of the top electrode. According to extensive high-resolution transmission electron microscopy observations and ab initio calculations, the phase transition of the conductive filament shell between monoclinic and tetragonal HfO2 is proposed to depend on the comprehensive effects of Joule heat from the conductive filament current and the concentration of oxygen vacancies. The quasi-core-shell conductive filament system with an intrinsic barrier, which prohibits conductive filament oxidation, ensures the extreme scalability of resistive switching memristors. This study renovates the understanding of the conductive filament evolution in HfO2-based memristors and provides potential inspirations to improve oxide memristors for nonvolatile storage-class memory applications.
8 October 2021 in Advanced Materials
8 December 2021 in IEEE Electron Device Letters
This work demonstrates vertical $\boldsymbol {\beta } $ -Ga 2 O 3 Schottky barrier diodes (SBDs) breaking through the power figure of merit of 1 GW/cm 2 without edge termination. The unreliable surface on the top of $\sim {1.2}\times {10} ^{{16}}$ cm −3 drift region, which naturally formed in air, was removed by inductively coupled plasma etching. The repaired surface was exposed to ambient air for less than 10 minutes during the entire preparation process. Compared with the excessive air exposure samples, the leakage current was well suppressed for the Ni/ $\boldsymbol {\beta } $ -Ga 2 O 3 SBDs fabricated on a clean surface. Moreover, the blocking voltage reaches a maximum value of 1720 V, and the forward/reverse characteristics of the diodes on the same wafer show good uniformity. These results pave the way for further improving the performance of $\boldsymbol {\beta }$ -Ga 2 O 3 devices and verify the potential of $\boldsymbol {\beta }$ -Ga 2 O 3 SBDs for power applications.
8 February 2023 in IEEE Transactions on Electron Devices
In this work, we demonstrate a novel conductivity-controlled junction termination extension (JTE) technique using p-type NiO—a key element for the potential commercialization of Ga2O3 power devices. The surface electric field at the Schottky edge is effectively suppressed by the p-type NiO JTE. Simultaneously, it can control the concentration of p-type NiO to maximize the breakdown voltage ( ${V}_{\text {br}}$ ) by changing the gas atmosphere during magnetron sputtering growth. The electrical characteristics of the $\beta $ -Ga2O3 Schottky barrier diodes (SBDs) with p-type NiO JTE are studied systematically. All $\beta $ -Ga2O3 SBDs with JTE show great advantages in terms of device performance parameters whether at room temperature or high temperature, which indicates the effectiveness of p-NiO JTE in reducing the fringe electric field. In particular, the $\beta $ -Ga2O3 SBDs with an optimized hole concentration of approximately $10^{{17}}$ cm $^{-{3}}$ for NiO in the JTE region exhibit a low specific ON-resistance of 2.9 $\text{m}\Omega $ cm2 and a high ${V}_{\text {br}}$ of 2.11 kV, yielding a high power figure-of-merit (PFOM) of 1.54 GW/cm2. Our results demonstrate the great potential of p-NiO as a controllable and reliable technique for junction engineering in $\beta $ -Ga2O3 power devices.
15 August 2023 in IEEE Electron Device Letters
In this study, we fabricated superb β-Ga 2 O 3 Schottky barrier diodes (SBDs) with high breakdown voltage ( V br ) and low leakage through combining platinum oxide (PtO x ) and anodic self-aligned mesa termination (SAMT). The PtO x that forms a high barrier with β-Ga 2 O 3 enables the SAMT to function sufficiently. The in-situ annealing dry etch process repair the mesa sidewall and improve the Schottky contact well. SBDs with different mesa-etched depths ( D ee ) were systematically studied, including 0, 0.3, 0.6, 0.9, and 1.2 μm. The results showed that the V br of the PtO x /β-Ga 2 O 3 SBD increased from 1120 V to 2738 V, yielding a high power figure of merit (PFOM) of 1.02 GW/cm 2 . Meanwhile, the device maintained a less than 10 μA/cm 2 leakage current density until -2000 V. Devices with radii of 200, 100, and 50 μm obtained highest V br of 2508, 2772, and 2738 V at a D ee of 1.2 μm, respectively. The devices can be passivated by SU-8 without V br degradation. This work provides an effective method for further improving the performance of β-Ga 2 O 3 SBDs and promotes the application of β-Ga 2 O 3 power diodes.