The European PreInstrumental Earthquake CAtalogue (EPICA) (Rovida and Antonucci, 2021; https://doi.org/10.13127/epica.1.1) is the 1000–1899 seismic catalogue compiled for the European Seismic Hazard Model 2020 (ESHM20), an outcome of the project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA), in the framework of the European Union's Horizon 2020 research and innovation programme. EPICA is the update of the SHARE European Earthquake Catalogue (SHEEC) 1000–1899, with which it shares the main principles – mostly transparency, repeatability and continent-wide harmonisation of data – as well as the compilation strategies and methods. Version 1.1 of EPICA contains 5703 earthquakes with either maximum intensity ≥5 or Mw≥4.0, with a spatial coverage from the Atlantic Ocean to the west to 32∘ E in longitude, and from the Mediterranean Sea to Northern Europe. EPICA relies upon the updated knowledge of the European preinstrumental seismicity provided by the data gathered in the European Archive of Historical Earthquake Data (AHEAD). Such data are both macroseismic intensity data supplied by descriptive historical seismological studies and online macroseismic databases, and parameters contained in regional catalogues. As done for the compilation of SHEEC 1000–1899, these datasets were thoroughly analysed in order to select the most representative of the knowledge of each earthquake, independently from national constraints. Selected intensity distributions are processed with three methods to determine location and magnitude based on the attenuation of macroseismic intensity and are combined with parameters harmonised from modern regional catalogues. This paper describes the compilation procedure of EPICA version 1.1, its input data, the assessment of the earthquake parameters and the resulting catalogue, which is finally compared with its previous version. Technical solutions for accessing the catalogue, both as downloadable files and through web services, are also illustrated.
ASMI, the Italian Archive of Historical Earthquake Data (https://doi.org/10.13127/asmi, Rovida et al., 2017), is a data collection distributed online that currently provides seismological data on more than 6600 earthquakes that have occurred in the Italian peninsula and surrounding areas from 461 BCE to the present, based on more than 460 seismological data sources. ASMI is the Italian node of AHEAD, the European Archive of Historical Earthquake Data, which is, in turn, the European node providing data on historical earthquakes to EPOS ERIC, the European Plate Observing System, a European Research Infrastructure Consortium. ASMI distributes earthquake parameters, sets of macroseismic intensity data, and other details about earthquake effects, along with the bibliographical reference of the data source and, if possible, the data source itself. ASMI's web portal allows users to query the data by earthquake or by data source and to download the earthquake parameters and macroseismic intensities and represent them on interactive maps and tables. ASMI is updated regularly with new data on past and recent earthquakes. ASMI is the basic source of data for the Italian Macroseismic Database (DBMI) and the Italian Parametric Earthquake Catalogue (CPTI). This article describes the archive content and structure, its main features and functionalities, and its potential seismological research applications.
6 September 2023 in Seismological Research Letters
Italy has a long tradition of studies on the seismic history of the country and the neighboring areas. Several archives and databases dealing with historical earthquake data—primarily intensity data points—have been published and are constantly updated. Macroseismic fields of significant events are of foremost importance in assessing earthquake effects and for the evaluation of seismic hazards. Here, we adopt the U.S. Geological Survey (USGS)‐ShakeMap software to calculate the maps of strong ground shaking (shakemaps) of 79 historical earthquakes with magnitude ≥6 that have occurred in Italy between 1117 and 1968 C.E. We use the macroseismic data published in the Italian Macroseismic Database (DBMI15). The shakemaps have been determined using two different configurations. The first adopts the virtual intensity prediction equations approach (VIPE; i.e., a combination of ground‐motion models [GMMs] and ground‐motion intensity conversion equations [GMICEs]; Bindi, Pacor, et al., 2011; Oliveti et al., 2022b). The second exploits the intensity prediction equations (IPE; Pasolini, Albarello, et al., 2008; Lolli et al., 2019). The VIPE configuration has been found to provide more accurate results after appraisal through a cross‐validation analysis and has been applied for the generation of the ShakeMap Atlas. The resulting maps are published in the Istituto Nazionale di Geofisica e Vulcanologia (INGV) ShakeMap (see Data and Resources; Oliveti et al., 2023), and in the Italian Archive of Historical Earthquake Data (ASMI; see Data and Resources; Rovida et al., 2017) platforms.
13 September 2024 in Seismological Research Letters
The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotectonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground-motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and predicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
3 August 2021 in Natural Hazards and Earth System Sciences
The geographic distribution of earthquake effects quantified in terms of macroseismic intensities, the so-called macroseismic field, provides basic information for several applications including source characterization of pre-instrumental earthquakes and risk analysis. Macroseismic fields of past earthquakes as inferred from historical documentation may present spatial gaps, due to the incompleteness of the available information. We present a probabilistic approach aimed at integrating incomplete intensity distributions by considering the Bayesian combination of estimates provided by intensity prediction equations (IPEs) and data documented at nearby localities, accounting for the relevant uncertainties and the discrete and ordinal nature of intensity values. The performance of the proposed methodology is tested at 28 Italian localities with long and rich seismic histories and for two well-known strong earthquakes (i.e., 1980 southern Italy and 2009 central Italy events). A possible application of the approach is also illustrated relative to a 16th-century earthquake in the northern Apennines.
15 May 2023 in Natural Hazards and Earth System Sciences
A methodology to detect local incompleteness of macroseismic intensity data at the local scale is presented. In particular, the probability that undocumented effects actually occurred at a site is determined by considering intensity prediction equations (in their probabilistic form) integrated by observations relative to known events documented at surrounding sites. The outcomes of this analysis can be used to investigate how representative and known the seismic histories of localities are (i.e., the list of documented effects through time). The proposed approach is applied to the Italian area. The analysis shows that, at most of the considered sites, the effects of intensity ≥ 6 should most probably have occurred at least once, but they are not contained in the current version of the Italian macroseismic databases. In a few cases, instead, the lack of data may concern higher intensity levels (i.e., ≥ 8). The geographical distribution of potentially lost information reflects the heterogeneity of the seismic activity over the Italian territory.