18 November 2024 in IEEE Sensors Journal
Attitude estimation is critical for navigation and control systems, and low-cost IMUs have become a preferred choice for many applications due to their affordability, compact size, light weight, and long lifespan. However, traditional attitude estimation algorithms, such as complementary filtering (CF) and quaternion-based extended Kalman filter (EKF), often perform poorly when the carrier is subject to non-gravitational accelerations or external disturbances. This paper presents a measurement adaptive reduced direction cosine matrix (MA-RDCM) attitude estimation algorithm. The algorithm constructs an EKF using a reduced direction cosine matrix as the state vector, integrating measurement data from MEMS gyroscopes and accelerometers for real-time attitude estimation. Furthermore, a measurement adaptive adjustment strategy is proposed, which dynamically corrects the measurement noise covariance matrix in real-time to address the degradation in attitude estimation accuracy caused by non-gravitational accelerations during carrier motion. The adaptive adjustment strategy effectively reduces the impact of non-gravitational accelerations and external disturbances, improving the accuracy and robustness of attitude estimation for low-cost IMU. The performance of the algorithm is evaluated through computer simulations and land vehicle experiments. The results show that the MA-RDCM algorithm significantly enhances attitude accuracy, particularly in dynamic scenarios, improving performance by approximately 33% compared to traditional methods, showcasing its significant advantages.
27 August 2024 in IEEE Transactions on Instrumentation and Measurement
The bionic navigation system composed of polarization sensor (PS)-aided inertial measurement unit could provide high-accuracy attitude and heading for unmanned vehicles in GNSS rejection or magnetic interference environments. However, the existing loosely coupled method is vulnerable to occlusion interference and atmospheric depolarization. Therefore, this paper proposes the tightly coupled attitude and heading measurement method based on full-sky polarization mode. Firstly, the tightly coupled system model is constructed, in which the sun azimuth error and zenith error are added to the state vector, and the angle of polarization (AOP) deviation of multiple observation channels are taken as the measurement. On this basis, a robust fusion mechanism based on the sequential cubature Kalman filter is proposed. And the linear gravity measurement update and the nonlinear polarization measurement update are carried out in turn to improves the system robustness. In the rotation test, the slight interference vehicle test, and the serious interference vehicle test, the heading RMSE of the proposed method compared with that of the loosely coupled method are reduced by 32.5%, 32.3%, and 70.2% respectively, which verifies the great advantages in practical unmanned driving applications.
24 December 2018 in Journal of Physics: Conference Series
Cold atom interferometer based on two-photon stimulated Raman transition has been proved to be a promising way to measure g with higher precision. In this work, we first introduce the principle of atomic interference gravimetry, including the interaction between the atoms and light, the interferometry with the Raman beams and the measure of the g. Then our gravity acceleration measurement system will be introduced, including atomic fountain, Raman system and detection system. With this device, we can get the value of the g, with the uncertainty in the order of ten minus seven.
1 August 2018 in Journal of Physics: Conference Series
Sinusoidal force is a typical kind of dynamic force applied widely in practice, and the sinusoidal force calibration systems are set up in Physikalisch-Technische Bundesanstalt(PTB) and Changcheng Institute of Metrology & Measurement(CIMM) respectively. To examine and compare the measurement methods for force transducer calibration, a comparison on sinusoidal force calibration is taken between PTB and CIMM. The experiment results show that the absolute value of the normalized error En between both sides is always less than 1, in the frequency range from 20Hz to 2000Hz, by using mass blocks A(nominal 1kg) and B(nominal 2kg). While the large deviation corresponding to the mass block C(nominal 4kg) at frequencies higher than 1000Hz may be contributed to some rocking effect at high frequency.
7 November 2023 in E3S Web of Conferences
Two-bundled conductors are generally used in the design of 750 kV substations. Compared to two-bundled conductors, multi-bundled conductors have higher load capacity and greater start-up voltage. This paper investigates the possibility of using multi-bundled conductors instead of two-bundled conductors in 750 kV substations from both technical and economic aspects.