High-elevation landslides impacting water bodies may trigger secondary disasters of landslide-generated impulse waves (LGIWs), which can cause substantial losses. This study employs a coupled discrete element method (DEM) and smoothed particle hydrodynamics (SPH) method to estimate the potential LGIWs hazard induced by the Meilishi (MLS) high-elevation landslide in the Gushui Reservoir. The DEM is used to simulate the landslide failure and sliding processes, while the SPH method is used to capture the water motion. To quantify the interaction between the DEM and SPH simulations, the dynamic boundary condition approach is utilized herein. The results show that the landslide mass exhibits significant deformation and disintegration characteristics during the sliding process. The volume release rate and the volume release ratio at different elevations show similar variation characteristics; however, the sliding velocity and kinetic energy release rate at lower elevations are significantly higher than those at higher elevations. The landslide forms an accumulation body approximately 1013.5 m long in the river channel without causing river blockage. The amplitude of the leading wave is much higher than that of the subsequent waves. There is no obvious wave reflection in the collapse area due to the convex shape of the opposite bank. The maximum water level (MWL) on the right side of the dam is higher than on the left side. The numerical model is then validated using large-scale prototype-specific physical model experiments, and the results indicate a high degree of consistency between the two models. Subsequently, the validated model is used to analyze the influence of entry velocity on the LGIWs hazard. Under the most dangerous condition, the landslide impacts the water with an entry velocity of 81.8 m/s, and the MWL is 2285.92 m on the dam face, showing a low possibility of overtopping. This study provides beneficial insight for accurately understanding the LGIWs hazard induced by MLS landslide and serves as a valuable reference for disaster prevention and mitigation.
Landslide-induced surge waves involve complex fluid–solid interactions, making accurate and efficient numerical simulation methods crucial. This study proposes a volume of fluid–discrete element method (VOF–DEM) coupling method, in which the VOF method is embedded within a two-way-coupled computational fluid dynamics–DEM framework. Turbulence is modeled using a Reynolds-stress model, extending the approach to particle-laden, turbulent free-surface flows. In parallel, a virtual dual-mesh porosity algorithm is introduced to compute local fluid porosity with high accuracy. The coupled method is validated by comparing simulated particle column collapses with experiments results. The findings demonstrate that the method effectively captures landslide downslope velocity, surge waveform evolution, propagation characteristics, and deposition morphology. Applied to the RongSong deposit landslide at the RuMei Hydropower Station, the simulation successfully reproduces the landslide motion and surge waves generation and propagation. The results provide reliable physical insights for predicting and mitigating landslide-induced surge waves hazards in mountainous reservoirs.