The increasing demand for energy worldwide has led to the development of supercapacitors, which are energy storage devices known for their high-power density, quick charging and discharging capabilities, large capacity, long lifespan, and environmental benefits. Here, we discuss the method for synthesizing manganese oxide/carbon composite materials through a one-step electrolysis process for potential application as supercapacitive electrode materials. The deposition of manganese oxide on graphite, together with the exfoliation of carbon flakes from the graphite electrodes induced by gas evolution during water electrolysis, led to the electrogeneration of a manganese oxide–carbon composite powder. After investigation of physical properties, the powder of manganese oxides/carbon composite was coated onto planar indium tin oxide (ITO) electrodes. Evaluation of the electrochemical performance and charge storage capacity revealed that ITO electrodes modified with the electrogenerated composite exhibited superior electrochemical performance compared with those modified only with a physical mixture of manganese oxide and carbon nanotubes.
Galvanic coatings of Co-Mn are promising materials for obtaining protective spinel layers of (Mn,Co)₃O₄ on stainless steel, which can be successfully used in solid-oxide fuel cells (SOFCs) as interconnects. To enhance the anti-corrosion and heat resistance properties of Co-Mn, tungsten is introduced into the coatings via electrodeposition. Mn-containing Co-W coatings electrodeposited from electrolytes containing various non-toxic organic complexing agents show a shiny appearance are roughly 5 μm in thickness, have strong adherence to electrodes, and have uniformly incorporated oxygen. We found pH and current density dependence of Mn-containing Co-W coating content in an electrolyte containing a sodium citrate-EDTA complexing agent. X-ray structural analysis indicates that the Mn-containing Co-W coatings are likely amorphous, consisting of an α-Co solid solution with disordered dissolution of W and Mn. The corrosion potential Ecor of Mn-containing Co-W coatings deposited on a graphite cathode in a 3.5% aerated NaCl solution is -0.530 V (Ag/AgCl).
22 March 2025 in Journal of Solid State Electrochemistry