31 August 2020 in IEEE Transactions on Antennas and Propagation
This work reports numerical investigations on the scattering from microwave blackbody, for developing a national standard facility on the emissivity determination in China. Based on the Kirchhoff’s law of thermal equilibrium, the standard facility follows a bistatic scattering measurement configuration and covers a wide frequency range. In general, the reflectivity is to be extracted based on partially collected scattering in the near-field region. The whole electromagnetic process, from the quasi-optical antenna illumination, to target scattering, and finally the aperture coupling reception, is modeled to be analyzed. It is shown in the simulation results that the Floquet scattering properties of the array-shaped blackbody can be obtained without fulfilling the far-field condition. Then, evaluations on the reflectivity extraction are performed at 54, 89, 118, and 183 GHz, addressing typical blackbody structures of coated cones and coated pyramids. The factors of referencing targets, curve integration, and the oblique incidence are discussed, as well as the case of geometry flawed blackbody. This work offers important reference and specific suggestions for achieving accurate and stable reflectivity determination in the bistatic near-field configuration.
17 February 2022 in IEEE Transactions on Geoscience and Remote Sensing
Before practical usage in microwave radiometers, the calibration targets must be tested for its emissivity/total reflectivity. In this work, we address the issue that remains in the total reflectivity determination, which is estimating the total reflectivity based on measured backscattering in the monostatic configuration, specifically at high frequencies. Based on the efficient modeling on periodic unit of the array-shaped calibration target, we quantitatively evaluate the relationship between backscattering and the total reflectivity, on the common structure of coated cones and coated pyramids. It is found that the total reflectivity estimation becomes target-specific for the coated cones; meanwhile, stable compensation can be concluded for the pyramidal units, which is important for practical testing in submillimeter applications. Then, the disturbing effects of the geometric defects on the total reflectivity estimation are discussed, and it is inferred that wideband measurement is vital for diagnosing those defects. Furthermore, actual test results are analyzed, showing the complex scenario in estimating the total reflectivity of a prototype with shape defects. Also, the numerical concluded $C_{g}$ compensation is verified in the clear case of a fine prototype. The findings in this work offer a direct reference for the application of microwave radiometer calibration, especially in the region of submillimeter waves.