1 October 2000 in Mineralogical Magazine
The technique of investigating 3-dimensional interconnections and the shapes of crystals in a rock by X-ray computerized tomography (CT) and image analysis was developed using a graphic granite specimen as an example. Fifty 2-dimensional tomographic images (slices) of the graphic granite were obtained ‘non-destructively’ using a medical X-ray CT scanner. Since a CT value of the specimen was decreased with increasing cross-sectional sample area by the effect of beam-hardening, the CT value was corrected using the area of each slice. Binary images of the slices were made comparing one of them with a thin-section of the slice. Using the binary images, connection analysis of quartz rods in the graphic granite specimen was performed on the basis of percolation theory (cluster labelling). This analysis showed that at least 89.9% of the quartz rods were connected in three dimensions. Furthermore, the 3-dimensional shape of the quartz rods was analysed using the 2-point correlation function calculated from the binary images. The average shape of the quartz rods was obtained by fitting an ellipsoid to the high-value region of the 2-point correlation function. The elongation axis of the ellipsoid agreed well with the crystallographic c-axes of the quartz rods.
1 April 2000 in Engineering Geology
X-ray computerized tomography (CT) was applied for the first time to the measurement of diffusion coefficients of heavy ions in water-saturated clay and rock. The mass absorption coefficient of X-rays is high for heavy elements. Thus the migration of heavy ions in the porous samples was measured by the spatio-temporal change in intensity of X-ray CT images. The measurements of diffusion coefficients of I − in bulk water, synthesized saponite (96.6 wt% H 2 O) and rhyolitic lava (porosity 24%) were demonstrated successfully. The one-dimensional transient migration of I − was imaged by a medical X-ray CT scanner with an in-plane resolution of 0.31 mm. The measured I − diffusivity in bulk water agreed well with that of the literature. Because non-destructive, quick and three-dimensional data acquisition is possible, X-ray CT has advantages over conventional methods for laboratory experiments on heavy-element diffusion in porous media. Keywords Diffusion Heavy element Non-destructive imaging Waste disposal X-ray CT
1 October 2004 in Journal of Contaminant Hydrology
The diffusion pathways of porous sandstone were examined by a three-dimensional (3-D) imaging technique based on X-ray computed tomography (CT) using the SPring-8 (Super Photon ring-8 GeV, Hyogo, Japan) synchrotron radiation facility. The analysis was undertaken to develop better understanding of the diffusion pathways in natural rock as a key factor in clarifying the detailed mechanism of the diffusion of radionuclides and water molecules through the pore spaces of natural barriers in underground nuclear waste disposal facilities. A cylindrical sample (diameter 4 mm, length 6 mm) of sandstone (porosity 0.14) was imaged to obtain a 3-D image set of 450(3) voxels=2.62(3) mm(3). Through cluster-labeling analysis of the 3-D image set, it was revealed that 89% of the pore space forms a single large pore-cluster responsible for macroscopic diffusive transport, while only 11% of the pore space is made up of isolated pores that are not involved in long-range diffusive transport. Computer simulations of the 3-D diffusion of non-sorbing random walkers in the largest pore cluster were performed to calculate the surface-to-volume ratio of the pore, tortuosity (diffusion coefficient in free space divided by that in porous rock). The results showed that (i) the simulated surface-to-volume ratio is about 60% of the results obtained by conventional pulsed-field-gradient proton nuclear magnetic resonance (NMR) laboratory experiments and (ii) the simulated tortuosity is five to seven times larger than the results of laboratory diffusion experiments using non-sorbing I(-) and Br(-). These discrepancies are probably attributed to the intrinsic sample heterogeneity and limited spatial resolution of the CT system. The permeability was also estimated based on the NMR diffusometry theory using the results of the random walk simulations via the Kozeny-Carman equation. The estimated permeability involved an error of about 20% compared with the permeability measured by the conventional method, suggesting that the diffusometry-based NMR well logging with gradient coils is applicable to the in-situ permeability measurement of strata. The present study demonstrated that X-ray CT using synchrotron radiation is a powerful tool for obtaining 3-D pore structure images without the beam-hardening artifacts inevitable in conventional CT using X-ray tubes.
6 December 2002 in Water Resources Research
1 January 2005 in Applied Clay Science
1 January 2001 in American Mineralogist: Journal of Earth and Planetary Materials
Self-diffusion coefficients of water molecules (H2O) in Na-montmorillonite gel were measured as a function of water fraction (54.8 to 100 wt%) and temperature (30.4 to 60.0 °C) using proton nuclear magnetic resonance (NMR). Spin-echo pulse sequences with magnetic field gradient pulses for the diffusion measurement were applied to the montmorillonite gel at the Larmor frequency of 20 MHz. The self-diffusion coefficient, D, of H2O in the clay gel is expressed phenomenologically by ln(D/D0) = 1.77{exp[0.0798(w − 100)] − 1}, where D0 is the water diffusivity in bulk water and w is the water fraction of the gel (wt%). The data for w > 84.7 wt% can be explained by a theoretical diffusion model for the randomly distributed clay grains. The activation energy of the water diffusivity in the montmorillonite gel was nearly equal to that in bulk water, so the normalized diffusivity, D/D0, obeys the temperature-independent master curve. The transition from the free diffusion to the restricted diffusion was not observed for gradient pulse intervals ranging from 5 to 120 ms. This indicates that the average pore size of the gel is much smaller than a few tens of micrometers, so the random walk trajectory of water molecules in the gel is geometrically restricted by the packing of clay mineral grains. Water diffusivity higher than that of the present NMR study was found by computer simulations and neutron scattering experiments in which effects of bound water were considered but those of the tortuosity of the grain packing were neglected. Thus, the predominant factor controlling the diffusivity in the NMR experiments is not the bound water near the clay surface but the geometrical tortuosity of the packing of clay mineral grains.