The possibility of crystallization of ZSM-5 with high Si/Al ratio was evaluated through the combined use of crystallization seeds and organic compounds that are not conventional directing agents for ZSM-5 (ethanol, methylamine, ethylamine, propylamine, butylamine, isopropylamine and diethylamine) in order to find a less toxic and costly route of synthesis. In addition, the influence of the stirring during the crystallization step on the properties of the ZSM-5 obtained in these synthesis conditions was verified. The obtained zeolites were analyzed by X-ray diffractometry in order to understand the effects of the templates. The analyses of NH3-TPD, nitrogen adsorption, SEM, and TG/DTA were performed for the samples with better crystallinity. The procedure was successfully employed for the synthesis of MFI samples using propylamine as an alternative structure-directing agent. Its mean crystallite size ranged from 23 to 24 nm and was efficient in the cracking reaction of n-hexane.
The new oil fields discovered in the Pre-Salt Province have large oil reserves, but the technological challenges for their economic exploitation are enormous. One of the problems with these reservoirs is that the associated gas has high concentrations of carbon dioxide, which must be removed and disposed of properly. In this way it is necessary to develop technologies for the separation of CO2 from natural gas streams, but there is a complication for these new technologies; the fact that they must be able to treat currents with relatively high concentrations of carbon dioxide. In the present project, the alkaline-earth cations Ca, Mg, Ba and Sr in the molecular sieve MCM-41 will be impregnated for adsorption in natural gas streams, as this modification will provide the formation of acid sites favoring the adsorption reaction.
Adsorventes microporosos e mesoporosos contendo lantânio do tipo LaNaY e LaMCM-41 foram sintetizados visando utilização na remoção de corantes têxteis. A aplicação destes adsorventes na remoção do vermelho congo por adsorção em fase líquida mostrou que o adsorvente LaMCM-41 apresentou uma eficiência de 74% de adsorção, sendo esta bem maior do que a do adsorvente LaNaY (36%). Esses resultados estão diretamente correlacionados com a maior área total, volume e diâmetro de poros do LaMCM-41 em relação ao LaNaY.