Semi‐transparent solar cells are emerging as promising devices for building integrated photovoltaics. However, regardless of the technology considered, the optical transmission of semi‐transparent solar cells is fixed during the fabrication process, and hence, cannot adjust to variations in daylight or weather conditions. This becomes an issue when applications such as photovoltaic windows are envisioned. Previously, it has been reported that the use of photochromic naphthopyran dyes in dye‐sensitized solar cells (DSSC) allows for the fabrication of semi‐transparent devices capable of modulating their light transmission and energy production depending on light intensity. Herein, a series of naphthopyran dyes with an identical pi‐conjugated backbone and varying alkyl substituents is reported. Using this molecular engineering strategy, the control of the discoloration kinetics of the photochromic dyes and the reduction of undesirable recombination processes when utilised in solar cells is demonstrated. The clear photochromic‐photovoltaic structure‐property relationships for these new photosensitizers is established and they are shown to demonstrate improved photovoltaic performances and photochromic responses in DSSC with notably faster discoloration than previously reported. For the first time with photochromic molecules, the co‐sensitization of the electrodes is explored and the highest power conversion efficiency for a photochromic DSSC is reported, reaching up to 4.34% under standard conditions.
Photochromic dyes possess unique properties that can be exploited in different domains. Here, we investigate the potential of spiro-indoline naphthopyran and spiro-indoline naphthoxazine dyes in photovoltaics.
Photochromic dye-sensitized solar cells (DSSCs) are novel semi-transparent photovoltaic devices that self-adjust their optical properties to the irradiation conditions, a feature that makes them especially suitable for building integrated photovoltaics. These novel solar cells have already achieved efficiencies above 4%, and there are multiple pathways to improve the performance. In this work, we conduct a full characterization of DSSCs with the photochromic dye NPI, combining electrical impedance spectroscopy (EIS) and intensity-modulated photocurrent spectroscopy (IMPS). We argue that the inherent properties of the photochromic dye, which result in a modification of the functioning of the solar cell by the optical excitation that also acts as a probe, pose unique challenges to the interpretation of the results using conventional models. Absorption of light in the visible range significantly increases when the NPI dye is in the activated state; however, the recombination rate also increases, thus limiting the efficiency. We identify and quantify the mechanism of enhanced recombination when the photochromic dye is activated using a combination of EIS and IMPS. From the comparison to a state-of-the-art reference dye (RK1), we were able to detect a new feature in the IMPS spectrum that is associated with the optical activation of the photochromic dye, providing a useful tool for assessing the electronic behavior of the device under different conditions of light excitation. This study provides guidelines to adequate characterization protocols of photochromic solar cells and essential insights on the interfacial electronic processes.
Because they can be made semi-transparent, dye-sensitised solar cells (DSSCs) have great potential for glazing applications. Their photovoltaic performance and light transmission depend not only on the dye used, but also on the electrolyte they contain. A few years ago, we introduced the concept of solar cells with dynamic optical properties based on the use of photochromic photosensitizers. These cells allow variable light transmission according to sunlight conditions, while producing electrical energy. We found that the electrolytes commonly used in DSSCs are not optimal for this class of photosensitisers and need to be tuned. In this work, we have developed and characterised two new photochromic dyes for use in solar cells and we present a study aimed at developing electrolytes specifically adapted to these dyes. Using a methodology based on the design of experiments (DoE) combined with a machine learning (ML) approach, we show that it is possible to quickly find an optimal formulation for iodine-based electrolytes to achieve good transparency of photochromic devices with an AVT ranging from 57% to 23% across the photochromic process, while keeping the photovoltaic conversion efficiency above 2.9%. We show that this approach can be applied to other classes of electrolytes with different redox systems, such as TEMPO/TEMPO+. After optimisation, TEMPO-based electrolytes yielded photochromic semi-transparent solar cells with a PCE of up to 2.16% and an AVT varying between 55% and 13% and opaque photochromic cells with a PCE of 3.46%. Finally, this new TEMPO-based electrolyte was tested with a non-photochromic dye and gave a PCE of up to 7.64%, which is probably the highest performance to date for a dye solar cell using a pure TEMPO/TEMPO+ redox system.