11 January 2011 in Advanced Materials
10 November 2008 in Applied Physics Letters
Arrays of angled microfibers with a gecko-inspired structure were fabricated from a stiff thermoplastic polymer (polypropylene) with elastic properties similar to those of -keratin of natural setae. Friction experiments demonstrated that this fibrillar polymer surface exhibits directional adhesion. Sliding of clean glass surfaces against and along the microfiber direction without applying an external normal force produced an apparent shear stress of 0.1 and , respectively. This directional adhesion is interpreted in the context of a nonlinear elastic bending model of an angled beam. Shearing and normal contact experiments yielded further evidence of the anisotropic adhesion of the fibrillar polymer and revealed the occurrence of a pull-off (adhesive) force at the instant of surface detachment, unlike vertically aligned microfiber arrays of the same material that exhibited a zero pull-off force. The results of this study provide impetus for the design of gecko-inspired adhesives with angled structures that demonstrate directional adhesion against different material surfaces.
3 May 2016 in Advanced Healthcare Materials
10 September 2008 in Langmuir
22 January 2008 in Journal of The Royal Society Interface
Gecko-inspired microfibre arrays with 42 million polypropylene fibres cm −2 (each fibre with elastic modulus 1 GPa, length 20 μm and diameter 0.6 μm) were fabricated and tested under pure shear loading conditions, after removing a preload of less than 0.1 N cm −2 . After sliding to engage fibres, 2 cm 2 patches developed up to 4 N of shear force with an estimated contact region of 0.44 cm 2 . The control unfibrillated surface had no measurable shear force. For comparison, a natural setal patch tested under the same conditions on smooth glass showed approximately seven times greater shear per unit estimated contact region. Similar to gecko fibre arrays, the synthetic patch maintains contact and increases shear force with sliding. The high shear force observed (approx. 210 nN per fibre) suggests that fibres are in side contact, providing a larger true contact area than would be obtained by tip contact. Shear force increased over the course of repeated tests for synthetic patches, suggesting deformation of fibres into more favourable conformations.