29 June 2022 in IEEE Access
This paper presents two different antenna modules at two different bands with a compact size structure that is used for both of mm-Wave and microwave bands, with the objective of keeping the size as minimum as possible. The presented structure consists of two integrated modules with overall dimensions of 24 $\times 15\times0.787$ mm 3 and is implemented on a Rogers RT5880 substrate. The first module is designed to resonate at 25.75 GHz with bandwidth of 4.15 GHz. The length of this module is taken as a constraint in designing the second module, which is the microwave one. This module is designed to have resonance frequency of 5.45 GHz with bandwidth of 1.12 GHz. The two modules are etched on the same substrate in an integrated fashion to give the required structure with two separate feeds and a separation gap between them in the ground plane. The proposed antenna structure is simulated using the CST-MW studio simulator, where it is found that for the mm-Wave module, the band’s gain is 5.58 dBi and the efficiency is 0.87 at 25.75 GHz. As for the microwave module, the gain is 2.45 dBi and the efficiency is 0.77 at 5.45 GHz. The proposed structure is implemented practically and the relevant measures agree with the simulated ones. A comparison of the proposed structure with other designs available in literature shows that it exhibits the minimum size among them, while keeping the other parameter values of comparable orders. The proposed structure is suitable for being used in 5G applications where both of the microwave and millimeter- wave bands are utilized.
5 October 2020 in IEEE Access
The emergence of smart terminals with the consequence of higher network traffic growth rates, has increased the demand for new techniques that are needed to meet user requirements for high-quality communication and social media services. One of these techniques is Device-to-Device (D2D) communication, allowing direct data transmission of popular files between users. This is an advantage during rush hours where there is no access to the traffic via a base station (BS), thereby reducing network loads. In this paper, we propose a new caching paradigm for D2D communication to achieve the goal of rising network offloading. A Smart Adaptive Algorithm (SAA) is proposed that smartly selects users with higher probabilities of sharing more data, then places popular files in their cache. This is done to optimize network offloading at minimal consumed energy by the user (user cost), taking into account the user speed, location, predicted zones, interests, and the size of the requested file. The data offloading ratio is taken as a performance metric in evaluating network offloading. It is defined as the proportion of requested data that can be delivered via D2D links. The offloading ratio is calculated in different scenarios in order to assess the influence of proactive caching on core network load. To minimize the complexity of the algorithm, and to respond in a shorter time period to the number of requests, user demand shall be handled with both the base station and the user’s device application. For the simulation and implementation of the proposed algorithm, a human mobility model that predicts different human mobility behaviors is used. The simulation results reveal that the offloading ratio is significantly affected by the size of the file transmitted via D2D connection as well as the user speed. The amount of increase in the offloading ratio due to the increase in the user speed is based on the size of the files transmitted through D2D connection. The smaller files transmitted via D2D connection would result in a significant increase in the offloading ratio, whereas the larger file size would result in a less change in the offloading ratio for higher speed users. The simulation results also reveal that higher speed users share more data at a high bit rates compared to users with lower speeds. Simulation results also show that the proposed SAA has superior performance as compared to other algorithms available in literature.
29 July 2024 in IEEE Access
Data-intensive applications coupled with limited mobile resources make opportunistic computation offloading imperative. Therefore, efficient and reliable offloading strategies are crucial for achieving optimal performance in terms of stabilizing data queues at various data rates, efficient task management and reduced waiting times for users. This paper proposes a novel algorithm, Matrix Factorization-Based Deep Reinforcement Learning Approach for Stable Online Offloading in Mobile Edge Networks (MFDROO), that combines Orthogonal Non-negative Matrix Factorization (ONMF) and a Deep Reinforcement Learning approach (DRL) to address the problem of stable online offloading in large networks. The proposed algorithm utilizes ONMF to model network resource heterogeneity by decomposing it into a set of features, capturing the underlying structure of data traffic flows by removing irrelevant information from data. This reduces computational overhead and improves performance. Additionally, MFDROO incorporates a DRL agent to learn optimal offloading decisions over time. By utilizing ONMF in conjunction with DRL, MFDROO overcomes online offloading challenges. It optimizes user computation rates and enhances system performance. Additionally, it maintains data-queue stability for large networks or higher data rates. Large-scale network simulations were extensively conducted to demonstrate MFDROO effectiveness. Maintaining stability while scaling up the users number is a challenge in network computation. Our results demonstrate that MFDROO tackles this challenge and ensures that even with a 3.3% increase in user numbers (up to 100 users), computation networks remain stable and outperform other existing algorithms in terms of utility maximization and stability. This improvement ensures optimal performance and provides scalability and efficiency for various applications.